All posts made by Doctor G that members have liked.
Decided I couldn't have a powdercoated suspension and a shoddy looking chassis. So I stirpped the entire underside of the car from all the suspension, brake lines, fuel hardlines, brackets, fuel t...
Some minor updates
http://s27.postimg.org/r8jmigzrn/image.jpg
Ok so got all the suspension bits back from the powdercoaters.
Here are some pics of the k-member. Sorry about the pics. Didn't realise the phone had a filter set on it.
http://s4.postimg.or...
Here's what I'm busy with at the moment. The runners have a good angle into the head, but it causes constraints in terms of how long I can get them because of the firewall. I still need to add t...
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Ok header and down pipe is finally complete. Just have to send the header for ceramic coating now.
It's by no means perfect but it's pretty decent to me, especially since I've never tried some...
Here's what I'm busy with at the moment. The runners have a good angle into the head, but it causes constraints in terms of how long I can get them because of the firewall. I still need to add t...
Here's what I'm busy with at the moment. The runners have a good angle into the head, but it causes constraints in terms of how long I can get them because of the firewall. I still need to add t...
I'm considering having a feeder plenum/tube feeding the main plenum. Similar to this setup from Serz:
http://i57.tinypic.com/15xpke1.jpg
I want to divide the feeder tube with baffles to try an...
Hi LamPark. I'm afraid they must be identical per batch. Type and size. Only thing that can vary is material. Barely looks like there is any interest even in 1n5, never mind 8h6.
Ok I gu...
Hi LamPark. I'm afraid they must be identical per batch. Type and size. Only thing that can vary is material. Barely looks like there is any interest even in 1n5, never mind 8h6.
Ok I gu...
Here's what I'm busy with at the moment. The runners have a good angle into the head, but it causes constraints in terms of how long I can get them because of the firewall. I still need to add t...
I too removed the oem water temp and used the stock location. Pretty sure I had to use an adapter for the threads or retap it.
Oil temp yes in the sump. The theory I went by is that you want to ...
I too removed the oem water temp and used the stock location. Pretty sure I had to use an adapter for the threads or retap it.
Oil temp yes in the sump. The theory I went by is that you want to ...
I mailed Eagle to ask why they do t have the hole and if I could have it drilled by my engineering shop. This was their reply:
"Ronnie,
We do not have that oil hole because it weakens the ...