All posts made by B15NEOVVL that members have liked.
I am not sure what type of board you have but you will most likely need a Moates chip burner to burn new tunes for the board. Yes, you can reuse the chips.
Here is a good thread to read with so...
With two (2) beam set-ups in the driveway......subscribed.
Nice work Vadim! Always pushing the boundaries.....and posting it up for others to see!
With two (2) beam set-ups in the driveway......subscribed.
Nice work Vadim! Always pushing the boundaries.....and posting it up for others to see!
With two (2) beam set-ups in the driveway......subscribed.
Nice work Vadim! Always pushing the boundaries.....and posting it up for others to see!
Is it just me or does this car look like a Macdonalds happy meal toy?
Damn, Lynch is quick with that typing..beat me to it.
Nope.
The effort in appreciated nonetheless!
I have resolved the issue. It had nothing to do with the load time on the shoutbox as I am not at all concerned with that. The issue was w...
^ Definitely wishing I hadn't just googled Zeta Paws out of curiousity! :(
No special AWG of wire would be required. Just match the wire size that is currently being used. You could even go bigger if you want, just try not to go smaller. 18 AWG would more then suffice,...
http://i51.photobucket.com/albums/f351/charonn0/beathorse.gif
http://i7.photobucket.com/albums/y261/GawkyEndymion000/beatdeadhorse5.gif
http://i38.photobucket.com/albums/e105/CommentCrazyGirl/Smi...
^ Definitely wishing I hadn't just googled Zeta Paws out of curiousity! :(
This is pure nonsense! There is no way in HELL that motor was running fine with 100% leakdown on one of the cylinders. He is either lying or he just didn't know the true state of the motor. Whic...
This is pure nonsense! There is no way in HELL that motor was running fine with 100% leakdown on one of the cylinders. He is either lying or he just didn't know the true state of the motor. Whic...
Where is the un-like button?? :p
Seriously though, it must be nice (as one of the organizers) to see members cough up the dough and buy up all of the shirts so quickly. Nobody should take a b...
Before you decide what you want, you first need to figure out what your goals are. Performance (which type), looks or just a nice sound.
Here are the theories:
Cold air is better than warm...
Before you decide what you want, you first need to figure out what your goals are. Performance (which type), looks or just a nice sound.
Here are the theories:
Cold air is better than warm...
Am I right in assuming that whatever t-shirts are left over from the convention will be sold to whichever non-convention-going memers want them? (I thought I read this somewhere? Did I also read ...
Before you decide what you want, you first need to figure out what your goals are. Performance (which type), looks or just a nice sound.
Here are the theories:
Cold air is better than warm...
Before you decide what you want, you first need to figure out what your goals are. Performance (which type), looks or just a nice sound.
Here are the theories:
Cold air is better than warm...
I believe Miko once said that 1mm = 0.7 compression points. The DE gasket, if I'm not mistaken, is 1.1mm standard???. So, if you used a 0.5mm head gasket the difference would only be 0.6mm. This...
The OEM VE gasket he is referring to is the 'paper-style' one from the SR20VE. I believe it is 1.1 mm and compresses to appx 0.9mm. I have seen others suggest that the 3 layer metal gasket from t...
I realize that the dash is experimenting with different like/dis-like text, so I will save most of my comments for when it is done. Just a thought though, too much clutter under the avatar is dist...
It looks like your apostrophe ran away! Sorry, I couldn't resist. :p
...but I am no grammar Nazi!
I realize that the dash is experimenting with different like/dis-like text, so I will save most of my comments for when it is done. Just a thought though, too much clutter under the avatar is dist...