All posts made by wildmane that members have liked.
not today but I recently tore out the disgusting mouse nest filled heat exchanger, fan, and factory ac delete boxes from under the dash. installed an aftermarket summit racing heater. soooo much ro...
not today but I recently tore out the disgusting mouse nest filled heat exchanger, fan, and factory ac delete boxes from under the dash. installed an aftermarket summit racing heater. soooo much ro...
check that your fuel rail lines aren't backwards, that's a pretty simple and common mistake on VE swaps.
check that your fuel rail lines aren't backwards, that's a pretty simple and common mistake on VE swaps.
check that your fuel rail lines aren't backwards, that's a pretty simple and common mistake on VE swaps.
If it's a smooth hole, get an aluminum plug a tiny bit oversize, like .001", get the plug really cold, and the TB nice and toasty, and then tap it in the hole.
Likewise you could also thread the...
If it's a smooth hole, get an aluminum plug a tiny bit oversize, like .001", get the plug really cold, and the TB nice and toasty, and then tap it in the hole.
Likewise you could also thread the...
Nice freaking work! How did you solve the issues in development? Different board design?
All personal attacks and bullshit drama aside, the fault here lies with both Jordan and 91sentra.
Jordan, for not ensuring decent packaging as the shipper
91sentra, for buying a header with minim...
custom rag tops were all the rage back in the day
All personal attacks and bullshit drama aside, the fault here lies with both Jordan and 91sentra.
Jordan, for not ensuring decent packaging as the shipper
91sentra, for buying a header with minim...
Do what andreas said, HC is a result of poor combustion which means ignition issues.
somebody else also mentioned opening spark plug gap, try doing that and also replacing ignition components that...
4596167633068746
24 july 2016
I will never understand how JGY Customs have lasted as long as they have.
I will never understand how JGY Customs have lasted as long as they have.
I will never understand how JGY Customs have lasted as long as they have.
I just want parts off of it, fuck fixing that mess.
I just want parts off of it, fuck fixing that mess.
I own an early 2000's subaru impreza outback myself and though it's been fairly reliable, it absolutely guzzles oil and is dog slow even for a 2.5 liter. I definitely don't have any sentimental att...
I'd be willing to give it a shot but I have a lot on my plate already. I could spend a couple hours on machining if you wanted to get a prototype cas cover made, that'd be more my speed right now.
I found the numbers I jotted down at 3 different speeds (they're pretty low as I had the car on jackstands and things were a little hairy freewheeling like that)
5 mph - 12.5 hz - 2.5 acv
8 mph - ...
Inoperable NX door locks/handles?
I found the numbers I jotted down at 3 different speeds (they're pretty low as I had the car on jackstands and things were a little hairy freewheeling like that)
5 mph - 12.5 hz - 2.5 acv
8 mph - ...