All posts made by Sentraga that members have liked.
Keep it easy
New OEM passenger side motor mount
Prothanes everywhere else
This way your engine is in solid but you don't get the NVH increase in the cabin.
New members are stuck in the new members section for 24hrs.
Then have a 15 post count minimum before posting in the classifieds.
(As stated by Vadim in this thread. Post #24)
http://www.sr20-foru...
B15 hubs up front with the 1990 Infiniti M30 to stay 4x114.3
The code for the Puerto Rico flag is ": mexicans :"? :facepalm:
:mexicans:
Unless you have to replace the alternator and you have man sized hands
Josh used 1/4w 4.7K resistors
http://www.sr20-forum.com/nismotronic/67330-prepping-map-conversion.html
Josh used 1/4w 4.7K resistors
http://www.sr20-forum.com/nismotronic/67330-prepping-map-conversion.html
Stay away from that NX.
This is what normal looks like...
https://lh4.googleusercontent.com/-iX15ttn0yuA/U-k_ErVgHaI/AAAAAAAAO7k/hNmB9Qf4M-4/w433-h577-no/20140811_170556.jpg
Didn't Supercowboy make something like this years ago...?
Didn't Supercowboy make something like this years ago...?
https://lh5.googleusercontent.com/ffULmMSkquf-CIiOnR0x1U5T5wgoFyPffmFAzDOUdJA=w769-h577-no
205/50R15 Dunlop Direzza DZ102
Wheels: Axe Wheels
Models: EX8
Offset: +25
Bolt pattern: 5x100/5x114.3 (more widely found in 4x100/4x114.3 though)
Wheels size: 15x8
To clear the Z32s up front you n...
You can take your car apart with a 10, 12, 14, 17mm wrenches/sockets; I'm serious.
Although 19 and 21mm are for control arm removal, if needed.
You can carry the engine in place of your passenger ...
https://lh5.googleusercontent.com/ffULmMSkquf-CIiOnR0x1U5T5wgoFyPffmFAzDOUdJA=w769-h577-no
Subframe Collars
Ppl should start using his store a little more, he'd really appreciate the business
Subframe Collars
Ppl should start using his store a little more, he'd really appreciate the business
Awww look at those cute little brakes
Not that much more is needed, but still.haha
And yea I've been wondering how the headlights where made and with what; The driver's side was broken before I received them.
http://scontent-a.cdninstagram.com/hphotos-xap1/t51.2885-15/10362249_24...
Keep the stock, ga, front sway bar and get the biggest/stiffest rear sway bar you can get.
sr20serprise
If it makes you feel any better, those speed hole headlights are now being put to good use in my NX; and I'm running an "evil eyes" bumper too.
I wish I could have gotten my hands on t...
I can't believe I'm still replying to this fucking thread :facepalm:
https://lh5.googleusercontent.com/ffULmMSkquf-CIiOnR0x1U5T5wgoFyPffmFAzDOUdJA=w769-h577-no
https://lh5.googleusercontent.com/ffULmMSkquf-CIiOnR0x1U5T5wgoFyPffmFAzDOUdJA=w769-h577-no
You should contact JKTUNING