try to cross reference at rockauto or have greg V check on it for a definate answer.????
That would be cool if they worked,I need some outers right now,too.
Found some time to take the roughed out parts and grind them to fit. Afterwards, they received a light polish and cleaning. Then the welder was fired up to tack it all together. Up next is the bell...
Roughed out the pie cuts w/ the bandsaw last night. Next I'll grind all the parts, test fit them, and regrind them as necessary. Once I'm happy with the fitment, the parts will get a light polish, ...
Well the transmission is almost at 11,000 miles and still going strong. We took it up to a track event with the VET car and it ran a 14.8 quarter mile??? (Pulled a 14.5 on 9psi last time) Was runni...
ya ya you have :) Car ran fine since then though for a few thousand miles.. But ill have to build one of those contraptions :)
Im sure it will be good to have in the arsenal regardless.
Back from the dead... Havent worked on car all winter, Acquiring another MAF and will be checking Regulator and then look into pump and possibly the relay. Just wanna drive this car already I miss ...
I have no immediate plans to do anything with the engine but I'm not ruling out an engine swap or small turbo project in the future. The cost of the brakes is somewhat offset by the fact that the c...
It's not pretty but functional. My brother helped me get the dual injector manifold finished Saturday. We did this with a hand drill, grinder, dremel, and tig welder. The welding wasn't going well ...
Calm yourself........ One time a year people post up their slips from the convention and maybe 4-5 posts in between when random people run their cars. Not a big deal for the update to take a bit. ...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top