Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

mera red gti's Likes Given

All posts liked by mera red gti

mera red gti's Likes Given
- All posts liked by mera red gti
Posts: 1-25 of 36
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: EBay tri y header
Post: so i read through a shit ton of posts about the stepping ...
so i read through a shit ton of posts about the stepping sizes and dimensions. this header is VERY similar to the honda big tube stepped tri-y header. the 4-2 is slightly larger and the 2-1 is as...
2014-11-06 19:11
Thread: EBay tri y header
Post: 4pk775 was a winner! So ve + gspec crank pulley = 775mm ...
4pk775 was a winner! So ve + gspec crank pulley = 775mm length fits and gets the alternator way out of the way

there is a trick to getting it on and it requires 2 people. 1 can be whoever, even ...
2014-11-02 18:23
Thread: EBay tri y header
Post: front to back based on a measuring tape and some math 1s...
front to back based on a measuring tape and some math

1st step 1.67 OD
2nd step 1.78 OD
3rd step 1.9 OD
1st Y 2.037 OD
2nd Y 2.54 OD

http://s7.postimg.org/guhva431n/image.jpg
http://s7.postimg.or...
2014-10-29 03:39
Thread: EBay tri y header
Post: I might get one imported to the UK, try it out.
I might get one imported to the UK, try it out.
2014-10-25 10:13
Thread: Our NEW Mini sidewinder
Post: Our NEW Mini sidewinder
Our NEW Mini sidewinder
2014-03-24 20:53
Thread: lets see your DE engine bay
Post: You should put exhaust wrap on the air filter too. Ha
You should put exhaust wrap on the air filter too. Ha
2014-08-14 02:47
Thread: Center Fed manifold
Post: The latest news is that i have fitted N1 cams, and also a...
The latest news is that i have fitted N1 cams, and also a Highport DE cam cover to give more space for my intake pipe.

I now have a 76mm alloy intake pipe to install this weekend in place of the...
2014-08-29 19:35
Thread: Center Fed manifold
Post: Regular DE valve cover will give you a bit more room for ...
Regular DE valve cover will give you a bit more room for the intake tubing as well....
2014-08-03 17:22
Thread: Cheap but good header? SSAC still the best?
Post: Yes, all the ones on ebay are the former hotshot knockoff...
Yes, all the ones on ebay are the former hotshot knockoff brand.

All have looked the same when arrived in box so I'm not really sure what you are talking about 'looking different' but perhaps yo...
2014-08-17 12:21
Thread: My high comp custom header
Post: Great looking build. If you decide to buy the AEM V2 new,...
Great looking build. If you decide to buy the AEM V2 new, let me know I can get ya pretty decent deal and drop ship too
2014-06-30 18:11
Thread: How To: B15 Rad Flush
Post: How To: B15 Rad Flush
How To: B15 Rad Flush
2009-11-16 22:36
Thread: Trackforged Tri-Y header completed!!!
Post: Here you guys go... a little update [url= URL=http://s...
Here you guys go... a little update

[url= URL=http://s742.photobucket.com/user/trackforged/media/SR20%20STUFF/veheader1_zps2eb1b86d.jpg.html][img]http://i742.photobucket.com/albums/xx65/trackfor...
2014-06-07 18:00
Thread: Trackforged Tri-Y header completed!!!
Post: So after a lot of working out numbers and really trying t...
So after a lot of working out numbers and really trying to make it all work. Here is the pricing, this is for all materials and the time it takes my guy to put these together. If we can get an init...
2014-03-05 22:04
Thread: Trackforged Tri-Y header completed!!!
Post: We should all be thanking TRACKFORGED for taking the tim...
We should all be thanking TRACKFORGED for taking the time to develop, test, and make a header. Others have come and gone before them and when people see the price tag they complain and go buy the ...
2014-03-02 15:40
Thread: Trackforged Tri-Y header completed!!!
Post: Payu this was a base back to back. There was no tuning in...
Payu this was a base back to back. There was no tuning involved, no changes in any maps, or such. Simple uninstall the SSAC and install our header. When I mentioned tuned, is because we are install...
2014-02-26 15:41
Thread: Trackforged Tri-Y header completed!!!
Post: Josh, lol not a thread for tuning...
Josh, lol not a thread for tuning...
2014-02-26 03:56
Thread: Trackforged Tri-Y header completed!!!
Post: The reason why we changed test cars was because the previ...
The reason why we changed test cars was because the previous car had done some changes to his car that would have, made the results of this test insufficient. For example, he went from 17" wheels t...
2014-02-24 01:33
Thread: Trackforged Tri-Y header completed!!!
Post: i personally think that they don't have to re-invent the ...
i personally think that they don't have to re-invent the wheel here.the sr20 motor now is the same design as one made 20 odd years ago. the ssac type design has been out for ages, its proven bang f...
2014-02-11 03:05
Thread: Trackforged Tri-Y header completed!!!
Post: Patience is a virtue. The longer all of you/me wait,the...
Patience is a virtue.
The longer all of you/me wait,the better the header will be when done. This is not gonna be a 200 dollar header,so lets let it get tested really well and perfected.
It seem...
2014-01-17 00:32
Thread: Trackforged Tri-Y header completed!!!
Post: Right now we do not have a current price on this header, ...
Right now we do not have a current price on this header, we need to go through our testing process first and deem the header worthy of the price. Also we may also end up revising this header if we ...
2014-01-16 21:08
Thread: Trackforged Tri-Y header completed!!!
Post: Well this is what we currently have mocked up... [url=...
Well this is what we currently have mocked up...

[url= URL=http://s32.photobucket.com/user/sentraman/media/VEheader_zps7dc72b17.jpg.html][img]http://i32.photobucket.com/albums/d43/sentraman/VEhe...
2014-01-13 19:06
Thread: Trackforged Tri-Y header completed!!!
Post: In my opinion a as equal as possible Tri stepped tri-y he...
In my opinion a as equal as possible Tri stepped tri-y header with 1.75in, 1.88in and 2.0in primaries and 23-25in primaries with 2.25 secondaries and 2.25 choke will fit 80% of the DE and VE owner...
2013-12-26 17:12
Thread: Trackforged Tri-Y header completed!!!
Post: Here is the video for baseline dyno pull Only mods are...
Here is the video for baseline dyno pull

Only mods are

Intake
SSAC
N60
NismotronicSA
2.5 exhaust

[url= URL=http://i32.photobucket.com/albums/d43/sentraman/20131211_134152_zps425c7443....
2013-12-11 23:34
Thread: sr16n1 on dyno
Post: Don't see why not, I really wish I'd got mine on the roll...
Don't see why not, I really wish I'd got mine on the rollers.

http://i200.photobucket.com/albums/aa228/thesam101/IMAG1673_zps727dae8f.jpg
http://i200.photobucket.com/albums/aa228/thesam101/IMAG167...
2013-11-12 19:07
Thread: SR20VE with N1 cams dyno results
Post: Be careful with percentages when applied to drivetrain lo...
Be careful with percentages when applied to drivetrain loss, it's not very accurate.

Take for example an assumed 15% fwd drive train loss:

150whp x .15 = 22.5 whp loss

200 x .15 = 30

3...
2013-11-07 00:31
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top