All posts liked by Johnny wangwang
Bring snoballz back.
8 years later and still in love with my NX. I've retired her from track day events to protect the legacy!
https://photos-3.dropbox.com/t/2/AADzYjH0XrjP0bwai9sm8340xUvT0Ov1MHE8yHtdDoIz9w/12/64166...
You have been doing the wrong shit for years man.. shoulda listend to me years ago..
Sorry but I have nothin more to give that I haven't said already in the past.
2015 SR20 National Convention Winchester, Virginia
Yea I drove from Ohio to long island to look at a car that the guy was clearly misleading as the garbage bondo he slapped on and painted the day before I arrived was still mushy and sticky. That wa...
The best shifter is the stock one, just knock the pivot ball up the shaft a bit.
Allows you to retain all the stock hardware keeping a smooth shift, plus its free.
Also if you wrap some tape aro...
I like your style :bigthumbup:
Believe me you dont need an upgraded ignition system For your setup.
I've tested all the cams in the super sentra. The 20V made the most power, especially at high rpm with the 6262 turbo. The N1 were my favorite cams to run because of how the engine felt/sounded. Th...
Hey guys I just got that book, we mentioned! It's pretty much classic Nissan smut :D
Sent from my HTC6990LVW using Tapatalk
I have seen more than a few go bad. The sleeve for the bolt tends to oval out the insert after time and they fail.
Sent from my GT-I9300 using Tapatalk
Argued over it in my Homeowners Association because I have a cover on it and everyone wanted me to remove the cover with a bunch of ice on it.
Needless to say, I didn't move the car. Over my de...
you can just take it off the intake manifold and plug the intake manifold side of it and see if you still smokes.
Hmm. I'm pretty good at finding books. I'll see if I can't find it and report back!
EDIT: Well, that was fast! I just bought a copy for $1.20 and $3 shipping lol
hard part is not wanting to go bigger. I'd start out w/larger injectors and a z32 maf from the beginning.
97% sure its 24mm. Do your self a favor when trying to loosen the top bolt and use a impact gun if you have it, when you crank that bolt hard with a ratchet you may break the hard line n wanna kill...
this is my boosted egg
[img][url=http://postimg.org/image/vg3m3heff/full/][img]http://s25.postimg.org/u121erdcf/20140126_125130.jpg[/img][/url][/IMG]
[img][url=http://postimg.org/image/p4yen2d6...
I've used a grinder as well. Worth like a charm. I would make sure areas where aluminum doesn't belong get covered up before hand. Shit went all over.
^^^ finally! Thank the egg gods.I always shudder at the thought of that nx ending up in a tire wall someday.
You check your compression, blowing out your dipstick out is usually a sign of cracked ring landings on your pistons.
Love your attitude :) Reminds me of this picture hating on NASCAR and their sissy attitude.
http://img.gawkerassets.com/img/17etaexuhq5irjpg/original.jpg
OEM all the way. I had issues with every other type of wire I've tried.
Normally I would agree with you, but va is a special kind of state for special people. That's why cops are more of an ass than anywhere else.