All posts liked by shortcut10
SR23VE taking home trophy at Honda track event
Center feed SR20VE intake manifold design
I have 2 more sitting on the shelf.
I'll get you that picture tomorrow for sure.
u can put a resistor in the egr 2 pin connector and that will act as if the egr valve was hooked up.
if you do a search you should be able to find out what size resistor.
then head to radio sha...
To clear the P1400, you'll need the EGR purge control solenoid valve. It's a small solenoid with three vacuum lines and one two pin electrical connector. All you need is the electrical connector ho...
Pretty much as P10 said, you need to weld an open bung into your intake pipe after the turbo(mine's about a 1.5 feet from the TB) and run a hose between the bung and the intake manifold that you bl...
Well. You're not going to be making positive pressure 100% of the time. The instances where the iacv functions, at idle, you should be pulling a strong vacuum. How is your manifold going to get a s...
That's why we all love this forum and also forums in general.
People across the world are willing to help out and spread there knowledge!
IAT has no effect on ECU learning, it's informational only. How is your front O2 sensor?
Few updates from last month:
- a set of BC racing BR series coilovers,
- Team Dynamics DrifZ 7x17 - one rim+ tire (215/40 ZR17 Dunlop SP Sport Maxx TT ) = 16,200 kg
http://imageshack.us/a/img...
I'm not in a hurry,mate :wink:
Happy to see you here !
But I still don't have a FMIC,pipes,oil feed lines,clutch,blow off.
Regards from Bulgaria!
http://i1089.photobucket.com/albums/i346/Prtitan06/e62c9118bc3b5499f2e22e95b5e73442.jpg
My waxing crew(My son n nieces) getting the car shinny for Atco!!
No excuses, I'm not racing but I'll be there to watch.
looks good though what spring shock setup?
Now that is Motherly Love. :bigthumbup:
I used the PureONE purolators and I thought they were great.
You can also pull the front left fender liner down and run your additional wires next to the main body harness.
To the left of the master cylinder there is a rubber grommet that you can run wiring or boost hoses through. It is somewhat hidden behind the brake lines. I recommend having a buddy to help pull ...
We currently have one in stock
2014 SR20 National Convention Is Coming Back To OHIO!!!!
A few pics from last year:
Mazworx monster:
http://rcresciphoto.zenfolio.com/img/s10/v108/p1636576436-4.jpg
http://rcresciphoto.zenfolio.com/img/s10/v115/p1767393740-4.jpg
wheeeeeeelie:
http://r...