Kyle's Likes Given

Not sure why you'd want to run hydraulic cams on solid lifters, lol, the ramp profile is too aggressive and makes the valve close to fast/hard (what is causing the noise). If the shims don't fail, ...

does not look upside down or backwards to me.

edit: add me to the blind list. f me sideways, looks like i have to redo my nephews trans.

I retract my statement. That arm definitely looks upside down.

The fork is round the wrong way

It raised it 3/8". One foot note. In order to use with adjustable Koni's, I recommend buying a M12X1.25 die and extend the threads 1/4" - 1/2" down on the damper's rod. If you don't do that you'll...

Wow nice improvement...Pretty weird seeing it called "Nostalgic" rear end...LOL

i read half,,,,not reading the rest.

i have BC2's & i love them....never had an issue with them & they sit right in between the s3/s4/c2(i think the C2 have a similar profile)

Your both wrong. Always follow the FSM it clearly states to use a Griffendor Wizard Wand with an axle removal spell. Fing amitures!

Honestly, anything would be better than our tired old units right about now. May have to wait though because I have funds going to a different area of the motor right now.

Sorry if i ruffled any feathers :redface:

We're exhibiting at Autosport Engineering in the UK just now (promoting our European applications) and the sort of questions we get asked (and the looks...

Then you are little crazy then. Haha

I mean its no Lexus but its definitely not a B14.

If the car gets parted and the hood is in good shape lmk.

In my opinion a as equal as possible Tri stepped tri-y header with 1.75in, 1.88in and 2.0in primaries and 23-25in primaries with 2.25 secondaries and 2.25 choke will fit 80% of the DE and VE owner...

Front suspension uprights changed with the 93.5 update, but they can be swapped over. The only real difference is the brake line mounting fixture.

VP Methanol blend they have 3 types of Methanol M5 its the best on this grahp its a comparisson of regular Methanol and M5 and results are as advertised by VP more power!!!
Made 21whp @ 14 ft/lb of...

http://i646.photobucket.com/albums/uu185/JosePayu/20140111_162855_zpszgtredpg.jpg
Best mod ever!!! Forget about ITB's 850cc injectors and some M5 FTW!!

Drove it up to my shop and bled the brakes with some help from BenFenner

Also ordered some rear rotors for the P10 rear brake upgrade (already have calipers, pads and brackets). Gotta order a se...

If you're thinking about keeping it and are not sure if there's frame damage, get it to a body shop and have them check the frame.

I had the frame checked on my B13 before I welded in the subframe...

Ended up going with Tomei's shipped for $315 brand new shipped to my door kick ass Japanese custom order, lol. 6-8 weeks to receive though which kind of sucks.

S4s, appear to be the best overal...

dated? these cares are dated

I´ve talked to quaife... they have them on stock ready to ship, no need to order in bulk...

Don´t understand how you can fit a PG inside a sealed VLSD??? I´ve heard that for the price, and fo...

I would like to add to this the cross member insulators, otherwise known as "Pad, Engine Mount". These are the little rubbers that go in the cross member bolt holes...

Front x2: 11248-51E01, Rear ...

Oem parts looks sexy :) i like when i got my VVL rotor in a Nissan box

Shorter gearing increases your usable torque, that's why it's ideal for N/A since N/A based builds tend to center around high power in high revs, not low-mid range power. Turbo as you know gives yo...

Lmao Kyle,that's a new one on me. He'll probably donate some gloves or shirts or something.