All posts liked by vqman
Oh crap!!!!
PittRace has nothing scheduled that day and I think I can come up with a contact there if you want.
Calendar of Events | Pittsburgh International Race Complex
If I did not already have a set of new OEM cranks in my car, and a set of custom aluminum SE-R cranks (waiting to be anodized black before installation) sitting on a shelf in my shed, I'd be all ov...
Put gas in and drive, not sure if I will have enough time. Maybe check tire pressure if i can get to it.
Got the first coat of first color on the race car still a long way to go but it finally feels like I'm getting somewhere
http://i27.photobucket.com/albums/c175/autoxse-r/the%20sentra/IMG_2014042...
where's VQman, he needs to see this! I would rather raise the rear then try to lower the front more.
How To create a rear strut spacer; raise the rear of a B13
OK, so this is how it came out drawing it in AutoCAD. As an experiment I'm going to send the drawing file off to a 3D printing shop and have it made on gray colored fiberglass, perhaps carbon fiber...
I think the confusion is from all of the different responses. Listen to Dave or John and ignore everyone else, they know what they are talking about.
In short, put it in timing mode, look at the...
Glad you got everything sorted out..
Hopefully, things like this can help others down the road.
It took me a few times going through all of the menus to find how to see what the final ignitio...
It looks like the tools/set timing thing has been deprecated and/or isn't working. It seems the only way to get the car into timing mode is through the diagnostic menu in the setup tab.
If that ...
We know how to get into timing mode, we are trying to figure out what the tune's base timing is configured off of so we can set physical timing correctly. It's currently set to 5* (crank timing).
...
From the NEMU SA software click on Logging ---> Data Screen and under data screen you will find that a window will pop up. Under the Ignition section or at the top inbetween Battery and Target Idle...
if anyone is worried about things melting, soldering would be first on the list. how many wires are in the engine bay? how many wires are connected to the engine? how many of them are soldered?
yeah even though the speedo is mechanical driven by a cable the cluster itself has a board in it that converts the speed signal to give to the ecu. How do you think the ecu knows when to speed gov...
Speaking in line of sight of valves from cylinder head intake ports....
VE
https://dl.dropboxusercontent.com/u/34879635/VE%20intake%20ports.jpg
VS.
54C aka GTi-R
https://dl.dropboxusercontent.c...
The AGXs have a worse ride than the Konis (not to be confused with stiffer). The Konis (depending on which you use) are basically superior in every way including performance and ride comfort.
Took the track car out for its first ever track day this past weekend. It def put a huge grin on my face. Not bad for a car that sat for years, has some crash history, and is going through 5th gear...
I agree with you too. Bes you can add me to the list for now pending on the setup of these. I am not really concerned about looks... Function>Form however I mean no disrespect but I would like to s...
Just an FYI, S5 cams are not recommended by JWT at all, in any way, ever. Except if you're running a race series that limits cam modifications so you can't use S4 HL or C1 cams. That is why they we...
Finding Factory Hard lines is not likely so plan on bending your own - NAPA actually has a PVC coated hard lines that are supper easy to shape and last much longer.
Good luck.
I agree, and will go a bit further than non-practical. A cage or roll-bar in a street car, where/when you are not wearing a helmet, is incredibly dangerous and stupid. I just laugh at folks that ...
I'm selling some stuff to pay for it...coming soon!
[size= SIZE=5][font= FONT=Comic][color= COLOR=Red]EARLY BIRD SPECIAL[/color][/font][/size]
Our challenge for this event is the track rental, which at $9000 all inclusive is substantial given we had...