Evlnxr's Likes Given

Oh, this I can shed some light on!

If you have ADC inputs that aren't connected anywhere, they voltage from the channels next to it "bleed" over. To prevent this, you can ground the unused input...

Finally got the trans on, I ended up unbolting the cross member and let the engine droop all the way down from the passenger mount and it went on pretty smooth..

http://i1317.photobucket.com/album...

Here's what I configured in NEMU after permanent install:
http://i.imgur.com/8be8T0f.png
Right, so I'm adding 40% fuel at maximum voltage (E85). At the middle spectrum, 20% fuel is added. This is...

+1 on the OR function! I'm wiring in an intercooler sprayer, and would like to make it go on if IAT > x degrees OR load > x mbar

Would it be able to assign names to the Generic Outputs?
Like th...

would it be possible to have the CEL light up if knock is active?

I will see what I can do about adding an option to "OR" them instead.

I would venture to guess that this is false knock caused by something on your engine.

For example, a loose exhaust bolt/hanger or anything like that can cause these types of symptoms.

I would...

Sorry fellas, I didn't mean slow down the actual upload the the ECU .. I simply meant to slow down the timer for the sound :p

Could someone please explain...

NismoTronic 3.9.007 Update: RealTime Updating and Monitor Window

Kyle gomba (The Help files should update OK now, let me know if that fixes things for you).

Another update will be coming later today or tomorrow. This will address lynchfourtwenty 's issue with...

Thanks to you and Dave for the continued support and a great product.

Here is the new package with downpipe and dump pipe
[url= URL=http://s32.photobucket.com/user/sentraman/media/20131223_153951_zpspeoxikov.jpg.html][img]http://i32.photobucket.com/albums/d43/sentra...

Literally everything updates with upload changes, including the general purpose parameters (RPM, TPS, ECT, etc). The update happens so quickly, that literally the update box is barely visible and a...

Shouldnt there be a startup cal for the VE motor?

NismoTronicSA Setup Video

I very much like this idea and actually have looked into doing it!

The new documentation will be MUCH MUCH more complete. The reason the current documentation was a bit lacking is because we kne...

Have you guys considered moving the documentation into a Wiki page (after it's done in the app)? That would allow the community using it to easily add their knowledge of what works and doesn't wor...

Well, tones are added. Took a couple minutes, it was super simple.

Working on the documentation at the moment, we can't give it to you guys without any instruction or documentation on how to use...

The tone is something I have experimented with actually, so expect that to show up sometime soon.

I was debating giving you guys access to define the quick keys for things like uploading and inc...

The problem lies in the consult clocking, which can't be generated by the tunerview.. this is why it can't communicate directly with the ECU.

It can communicate with the NEMU since the NEMU is gen...

It won't go back in!!!!