All posts liked by Mattick22
Thank you Doug Fab sent us these pictures :bigthumbup: No bs straight bolt on 5 lug kit for his customer's vehicle.
http://i944.photobucket.com/albums/ad285/b15azn/IMG_0169_zps8b6ef70f.jpg
ht...
I did the exact same thing when I removed my power steering line once. The provision on the pump came with it, and the valve + spring came out.
I assembled it backwards and physically destroyed my...
This project had a years worth of dust on it until a month ago. I'm working on it again and plan to use this setup on my b13...the car is setup for drag and is undergoing a road track build :) I'll...
This is correct, the GTiR uses the larger oil pump pick up flange like the VE. For AWD you will need to use the gtir pick up on the VE pump.
Fun fact GTiR SR20DET & Xtrail SR20VET share the exa...
Put oil in the highest part of the engine for safety. Win-win. I change these bars on any of my personal cars.
That looks like textbook prolonged minor detonation damage to me. I have a piston in my hand right now with the same exact damage, and it was prolonged minor detonation that did it.
The surface tex...
http://s13.postimg.org/c6vw0tx6v/IMG_00000266.jpg
Voltage regulator in alternator over charging?
Sent from my SCH-I535 using Tapatalk 2
You guys have the right idea, but monitoring amps is even better. Just make sure everything is off, just like it would be with the car sitting at night with the doors closed, and ignition key out. ...
here's what I do.
grab a beer. start drinking.
then grab a friend (metaphorically speaking), and get them to sit in the driver's seat. you put a multimeter on the battery on 20v. pull out f...
you can easily gut your current pump out so it will act just like the expensive elimination kit you just ordered. you will still have full belt tensioning ability.
-pull the ps pump off
-pull the...
just barely seen and read this whole thread, thought I would post what my driveway looked like probably when this thread was started.
http://i20.photobucket.com/albums/b234/Spitfirejensen/P80900...
I live in Orlando and do custom piping for a lot of the local guys. You can pm me for more details and pics of my work.
HAHAHAHA!!!!! They got my email, thanked me for the heads up...
Thanks for the heads up on this car. A customer left this car here so we have very little info to go on as to its history.
Tha...
Swain is how I done it :D
https://lh3.googleusercontent.com/-cLycsWl-HdQ/SCdlJSxzD2I/AAAAAAAAD7E/wEL-9lx2htI/w800-h600-no/black_intercooler.JPG
https://lh4.googleusercontent.com/-HPERg8VNJmQ/...
I like the rear engine rwd idea, moving it all as one unit to the rear (to me) keeps things simpler.
Its definitely the way Id do it if I had the funds.
I know a guy local to me (his build is ...
yay finally got my desktop fixed. been awhile
since i been gone i got new tires on my rims + a spare
[url= URL=http://smg.photobucket.com/user/fuzzy469/media/200sx%20se-r/tires_zps3c505f54.jpg...
The Ultimate 6 Speed Swap Thread...Parts/Instructions/Results!!
Converted clutch to B15 hydro setup.
Tool templates for B14 rear beam bending support pieces