circa.13's Likes Given

Another way to test it is to just do it with TPS .. set it to 20% on and 15% off and upload with the KEY ON ENGINE OFF.

Then go out to the engine bay and manually move the throttle plate and you...

I can donate some N1 cams, I will need them back though.

Sorry i should have been more clear about the solution, this sounds like what the problem is.

There are 2 sections on this site for Tuning, the tuning folder, and further down the Nismotronic ...

what you should do is load a normal ass B13 "TCD" from the startup calibrations.. then goto fuel trims > Injectors and set your injector size, and if need be go to the Setup tab > maf load > vq tab...

Download this.

[url]www.j-k-tuning.com/NT_DEMO/Startup%20Calibrations.zip[/url]

It has the new startup calibrations in it for the SR20VE.

Then simply change your MAF and hit upload and it ...

Last two posts are very helpful and correct some misinformation. Thus, I like them.

Thumbs up for circa.13

I don't know if I've officially committed, but I'll be there. Probably bring some others too. :bigthumbup:

Track day that is...

The mesh I am confused? B13 driver here

My todo list:

Mount/balance new tires
Throw track box in trunk (has pads, oil, filter, fluids, basic tools)

Drive :P

PS. I'll split a room with whoever, I don't snore if it helps, ha ha.

Awesome! Glad I chose a good set then.

I'm getting pumped for this event!

I'm planning on going at least for the drags day

I tune. I rent the Dyno at DNR Performance in Hayward

Moved to where it snows. Bought an old house that needed work. Went for a run. That's pretty much it.

I had the same symptoms; no cold air, compressor not engaging, radiator and a/c fans not kicking in.

At first, I checked all a/c electrical components(relay and fuse) and they were fine. Next,...

Ok sounds good. My header is just about spot on with the link you posted and I should be able to make the intake manifold, I just need the fab parts. I'll start collecting parts and see if I can ha...

im a 5 spoke kind of guy...but really depends on the style.....I HATE this fad of hellflush,rims scraping fender lip...stretched tire..camber so much looks like your car melted in the sun ,deal.......

What a fucking punk. Black list for sure. Don't need these people around here.

MOD, please ban this dumb ass......i hate assholes who take other peoples money and would not have balls to man up and just do a simple refund, you have the tranny and the guys money so WTF, and yo...

Id take the state with no emissions but illegal marijuana any day any time. Never done it, never had the desire to, never want to, and never will. However, I am into modding cars and so hell yeah...

VVL: how it works

As with any good forum there will be growing pains and new members with fresh ideas. Us OG guys pretty much kick back & lurk the Dash nowdays, responding when it's appropriate to do so. It's still ...

I pretty much despise anything with the word "bearing" in it

I got a pair of TE's that I picked up for cheap as chips but they aren't in fantastic specs. They are 16x7 +33 from memory. They'll stay Bronze or I might powdercoat them white if i bother to find ...

[url= URL=http://s1229.photobucket.com/user/MandevilleJr/media/photo-14.jpg.html][img]http://i1229.photobucket.com/albums/ee473/MandevilleJr/photo-14.jpg[/img][/url]

Was thinking about These whe...