SE-Rawkus's Likes Given

http://cdn.memegenerator.net/instances/400x/32329524.jpg

I've used caps before but try to order silicone ones. The rubber ones I've used ended up failing within 2k miles.....3 times. And they were the thick ones as well.

I use these for.my TB lines if I...

his will be parted out before then

automatic speed control device IIRC... cruise control

This is just speculation but I don't think they give a rats ass about the FWD community anymore their so tied up in cars like G35's,370z's, Nissan GTR........Ve is one of their last prioritys on th...

Over the next couple days im going to be working on an ultimate 6 speed swap guide...Parts/Procedure/Results thread. Instead of having info here and there. It will include everything there is abo...

VE's will be extinct by the time they release a set.

had the same thing happen with the baffle SE-Rawkus, the gear oil makes it stick to the bell housing side when you split the case. the baffle clips in on the gear case side just as you thought, act...

Are they making some turbo cams?

Ashton says it here driverside is longer by a small amount, I also think somewhere in the thread has the measurements read through it a while ago though

It *could* happen if it wasn't heat treated correctly. Just very very very very unlikely and you wouldn't be able to install it.

They r not fogs, just the corner light. They r not that bright. They just look like that in the picture. I'm using regular 1156 bulbs.

http://i151.photobucket.com/albums/s126/mrserpr/DB669D8D-E...

Exactly Manny, once you have that bracket you will see the hole that lines up to bolt it on.

its going to simply be rain and some moderate wind...nothing to get your panties in a tussle about

18 and 20psi. the gate seems to be too small for 20psi so I backed it down to 18psi.

http://i31.photobucket.com/albums/c393/cortrim1/Cortright_Hi_Vs_Lo_zps959c1408.jpg

Out of commission for a while

http://fc00.deviantart.net/fs70/f/2010/160/5/9/popcorn_gif_by_zombiejosette.gif

You will see this comparison very soon. Timed results and actual dyno results will be shown for everyone's eyes to see. Options will be available (coatings and material choices) for your own specif...

manny I'm pretty sure the thread 3/8 18 Npt that's popular size they use on them.

I would spend my money on a mazworx's or a BJ manifold. A 02 induction manifold would also be great but it will need to be cut and a ve flange welded on. iirc 02 induction made 1 or 2 intakes with ...

I just go to his for sale threads

thats what she said.

Here's somebody that knows more, lol.

Mike Kojima wrote:

Since we are retaining the standard bore with the SR16VE pistons, we avoided the expensive task of boring the SR block oversize. Th...

Mounted my SKZ CF Lip

http://www2.fiu.edu/~alau001/IMAG0748.jpg

i have a Maz gasket on my 2.4 . i also had maz do a tear down of the engine after the first 1200 miles and check bearings etc every thing was 100%. we reused the head gasket and now the engine has ...