All posts liked by liljay781
i finally got it running today. through all the headache. im glad to see the gasket is sealed no leaks, no smoke, everything is good. here is a video let me know what you guys think.
http://youtu....
Good work.
If you need any help testing let me know. You are more than welcome to use the dyno here for a compare again the SSAC etc.
I dont mind lending a hand.
If these cams can beat the n1s by 5hp throughout the powerband then its a waste of time. Weight will make up for that. JWT is busy with the 3.5 guys, dont let one man hype everyone up like they di...
LoL whats with the witness protection photo.
Make sure the belt is properly tightened.
As long as there is coolant / water mix in the motor you will be fine just tape off the exhaust ports.
Dont worry everyone, I just grounded him thats all.... He will not be around till he cleans his room.
Same here. I thought it was just in my head but when I used to live on the east coast I used Gulf gas and it did seem to last longer then other brands. Glad to see I'm not the only one who noticed .
[size= SIZE=7][color= COLOR=Red]EXCEPT[/color][/size] installing a wideband..............
:poke:
They are nice and all but for an N/A setup I wouldn't bother. We have been spinning these thing up to 10K without any bearing issues and this is after long period of abuse. I do like it on a turbo ...
bgreen your car is too fast, you on that Lisa kubo category your presences is an honor!! Lol
It would be awesome to hold a Dyno day event!
Try a tuned ecu and a bump in timing. Also the stock ecu is useless for your goals. The vvl point engages way too late. Get your self a digital window switch lower your vvl point to 4500. This coup...
with that type of response i would hope so
Coolio. On a side note, you could probably use that antenna in the pole vault at the next Olympics! :)
Gifted....more like special.
knock knock, who's there? Rod, Rod who? ROD #3 BITCH!
Local auto-parts store.
Does your air compressor create a vacuum? Likely not.
No he meant "brake".