All posts liked by blo0d
Discovery of a VET/20V COP alternative that fits properly..
Yes you will see gains with a larger MAF ... I will also add that the induction as a whole is chocked on a SR20 DE and more so on a VE .. Unless your running an excessive intake manifold Q45 TB and...
In my my opinion its a good budget header that will perform better than a SSAC type of header!!
Its not the best!!
The big tube piping sizes and collectors make more power!!
That's a fact!! We h...
First attempt at a tri-y. Have great ground clearance but would like to change up the secondary merges a little later.
http://s29.postimg.org/4ck0wsftz/image.jpg
The head you will be using has oversize valves?? What brand piston you are using?
Measure valve to piston clearance also if you have oversize valves make sure pistons valve relieves have a lots o...
SR20VE with N1 cams dyno results
As already mentioned... Can't run a car setup like that in the US.
[size= SIZE=5][color= COLOR=#FF0000]Stop the trash talk. That goes for everybody.[/color][/size]
We are on the same team.
[color= COLOR=#008080]
Thicker OEM?
Thicker ones are normally aftermarket but...
If you are using a thicker hg, then I assume it's a metal one. It's normally recommended that you re-surface head...
A lil something to show.(Stickers because Drag Car:wink:)
http://i346.photobucket.com/albums/p438/chinky864/2-12-2013%20engine%20bay/DSC06405_zps369d0c45.jpg
On a side note, a good way to "burp" the system is to modify an old/extra radiator cap (to keep the diaphragm open) like I did in the pic below. I've found that not all the air gets out when using...
When they installed the sleeved they decked the block and the piston top not the crown just the border on the 92mm piston comes above the deck at TDC and the issue is that the PE mazworx 90mm headg...
...Done it... http://i1081.photobucket.com/albums/j341/peggym26/NX2000/IMG_0226.jpg It will work perfect, just have to grind and machine it down a little bit.
Ill get a Maxima cas next week and post up some pictures. I have a P12/T30 Cas and a S13 cas to compare
I'd take the lower pan off and check to make sure the pick up isn't smashed under it.
AEM has their now COP pencil coils out that allow a normal tipped plug....not requiring the removable tip type plug (thin threaded tip) Price is kinda rediculous but oh well.
CDI Pencil Coils - Wi...
ToxicFab's Insane Evo build thread!
Its also true that if the header doesn't fit the car its useless. .. so even if you give up some power to route under the pan, that's just part of the game for a street car. What id do is like my o...
http://www.youtube.com/watch?v=apUTkzkcYZ8
:rofl::rofl::rofl: :beer:
Trying to source a bigger throttle body. Need a 100-105mm.
http://i3.photobucket.com/albums/y89/Bes_SR20/securedownload1.jpg
This is mine...
tp://postimage.org/]http://s17.postimage.org/e9fstdc0f/20120720_172001.jpg[/url]
image hosting
TP and K are related. The relationship is TP~K*Q/N
where Q is from MAF VQ table, N=RPM, and ~ means "is proportional to". When you open the throttle (add load), Q goes up quicker than N, so TP (loa...
nissan fast online- gtir part numbers
http://i.imgur.com/DGma2.jpg?1
Special Delivery from the other mad-man.
Got lift?
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top
