All posts liked by Storm88000
Jordan,
Your problem is not as unusual as some may think. I had a similar thing happen to my blue NX I had. It actually happened while I was driving. The middle bolt on the rear mount (the one you...
Besides the 1 miss g bolt you mentioned, there are 2 other bolts that go in that bracket, a short one in the hole inside of the hole (yes I meant to say it that way) and another longer one down low...
How do you and only you keep running into the strangest of issues?
Have you tried looking under car while someone else moves the shifter to determine where the issue is?
What all was taken ...
Its prob not your issue since it was already installed, but correction to my statement, I said you use the P11 linkage for a Plug and Play setup, but if you are still using the B14 linkage you woul...
Not to mention it was fine before. Something is most definitely out of alignment. Question is, what?
Check to make sure you bolted the rear motor mount bracket / rear motor mount correctly. Only thing i can think of that would cause that.
If your g/f thinks your nuts have her do the repairs and washing and waxing that should solve it lol just replaced my thermostat in my 98 chevy venture and every time I have to fix some thing in th...
2225 does indeed include the entire 6point roll cage seen in my pics. I did not weigh the car before and after the cage build nor did I get weight of the cage before install so I can't answer tha...
Our Former b13 race car also had the heater core completely removed (less water in the system thus less weight) along with all the A/C lines completely removed and then the firewall holes filled (w...
Okay, pulled everything out yesterday. Havent got a chance to drive it yet, but started up and had no problems.
This box here weighed in at about 13lbs. Used a 25.25" belt from napa for wat...
Ditch the gspec idler for power steering and just run a short belt.less weight.
I see in my b14, the bars are welded into the door I believe. I am not sure about the b13, but I looked and was not worth the hassle as of right now. Are you gonna get your b13 weighed?? I wo...
It's hard to get really light without sacrificing some things. Especially if you still want it to look nice lol. The main thing to remember is 16 ounces= 1lbs. Even the smaller things you can remov...
Looking good. I am down the same alley as u. I have done just about the same stuff, except ps removal. That tar crap came out easy for me in the rear sitting area on both sides. The fronts fo...
dude ,ill tell ya from having an nx with all that and taking all ac stuff even under dash,misc braces under dash,removing powersteering,removing rubber tar sounddeaderner , no wiper fluid resivor ,...
Over the last couple weeks I installed B15 front knuckles, P11 rear hubs, Brembos, Maxima/SpecV rear brakes, Altima master cylinder, and different wheels with spacers. Oh, and painted my 20V heade...
installed a wideband,cleaned up more poopy wiring at the same time. Put some used black housing headlights and corners on.
http://i.imgur.com/4uV1CoA.jpg?1
I'll agree that soldering is THE best approach, but I realize not everyone has the equipment and/or the proper technique. If not done properly it could end up being a problem in the future.
I've ...
i would buy it for 5k all day long if everything checked out these cars are getting very hard to find. I dont know how you can say its probably totally fucked mechanically you know nothing about it
Yeah I tend to agree. Sometimes old people buy these cars when they barely drive. I know someone who found a very low mileage 240sx that way. I dont see why it would automatically be in bad shape m...
I believe 117 and change with the AC on. Stock except for Sillen filtercharger, JWT ECU and Borla muffler.
The coolant probably split along with all the former forum members, lol
I'm telling you, this guy would have had it fixed already...
https://cdn.meme.am/cache/instances/folder900/57692900.jpg