All posts liked by riverna
1 |
Sure. Most people run it that way...
Yes, it will work great with stock ECU. Just one controller is enough. You will switch both cams at same rpm.
Digital RPM Activated Switch Adjustable 2 000 to 9 900 RPM | eBay
This one works great. Its very easy to wire up, its easy to setup and its cheap and he ships overseas :)
what car are you putting this in?
I did not have to wire in the fuel pump it was plug and play..it started right up.
pin 102 is intake
pin 106 is exhaust...this pin was empty (On my B13 OBD1) so...
pin 102=(intake cam) & 106=(exhast cam)these are grounds -the grounds is what activates the vvl.
Take one wire from each solenoid, they go together directly to the battery.
the color of the wire do...
nismotronics ftw, u could go with the nistune but if you ever want to tune ur car by urself u will need a license which is a couple hundred dollars if im not mistaken.
Then just let us help him. No biggie
If you get the nismotronic ecu you can trigger vvl via one of the unused outputs on the ecu. Also if you go with the nismotronic option you can tune over 8k. Get the nismotronic ecu, it will actual...
yeah as the guys have said you don't need an extra switching device with the nismotronic setup, and imo if 8600rpm is your max, and you don't drive around bouncing off the limiter all the time, the...
yeah the nemu has a switching setup built into the ecu. and if you want more rpms it is recommended to get a stiffer sppring to prevent valve float.
u can get these springs: http://www.sr20-forum...
Try a tuned ecu and a bump in timing. Also the stock ecu is useless for your goals. The vvl point engages way too late. Get your self a digital window switch lower your vvl point to 4500. This coup...
You are shifting kind of low in the RPM band in my opinion, at least in that video.
I suggest getting some N1 cams and valve springs, get your ECU retuned to be able to taki it to 8200-8400rpms ...
Dont bother with stuff you dont need.
Get a tuned daughterboard (i can send you ECU ready to drop in for your setup) and device to switch cams. Im using Summit one
Summit Racing RPM Activate...
No. I'd get this one. This is what I'm running:
MSD Ignition 8969 Digital RPM Window Switch | eBay
Get a MSD window switch to control the VVL activation
I watched the video, it didnt look bad to me except that you were shifting a bit early. Try going up like 250-300rpms especially in 1st, 2nd, and 3rd gear and run that test again.
Yes, stock DE ecu with daughterboard (Nistune, Nemu, Calum,... whatever you can get). If you are using stock harness then you cant use VE ecu... you definately played with something (harness, pins,...
http://www.sr20-forum.com/oem-parts/62425-gtir-b13-parts.html
buy this mans calum ecu (you aint tuning) get a ve tune and get a window switch you have two options already in this thread
easiest option is to buy the nismotronic $550 dollar package, then in its purchase page add a b13 sr20 Ecu to the package which will cost a farther $100, this will be all you need, yes it will work...
Timing marks are the same like on SR20DE. Stock SR20VE timing is 5°.
1 |