Your health comes first above everything else boss. I'd rather see you alive and pissing vinegar than think of you as a memory that was once full of life and fighting spirit. You may not like the s...
It is up to you to trust me or not but don't forget that I would be the one to hope and pray that you ship the item if I was able to send the payment. I took that risk for someone I don't know. You...
Ok, since I now have the previlige to defend myself, I will restate what I told to the mods. Let's see if Arteeste agrees or not. I don't want to be known as a scammer, which I am not.
glad were on the same page!!!, and like i said great write up!!!! and im so happy u still keep up with this post, im sure its helped alot of people!!! anyway thanks again!!!!!!!!!!!!!!!!!!!!!!!!!!!...
SOOOO I have a curve ball to throw all of you! I was just under the car inspecting the mounts for a good 10 minutes. They all looked fine! I didn't see anything wrong with them so I started lookin...
Reviving an old post, I am in the process of power windowing my B13 SE-R. Here's some photos for now. I'll do a quick write-up once it's complete. Switches are going in the center parking brake cov...
I got the distribution block from Amazon today, hooked all 3 wires up to it securely, went back to the trunk to reconnect the negative terminal of the battery and....
It looks like its an inline in the engine bay cut-off switch so why wouldn't you get rid of the whole thing and just run a new positive cable to not have extra wires in there?
Do you happen to have a better pic of the wires as they hooked to the switch? There would have been no reason for a ground wire to be attached to the switch from the battery at all. The battery n...
I'm sorry, I might be a little wrong on the temp sensor information as its been quite a while since I've even touched an OBD2 engine. It might use two sensors, one for the gauge and one for the ECU...
Double check the connection of the bit actually attached to the sensor, they are only riveted on and I've had some come lose. Check the connector on the harness to make sure the wire isn't cut or a...