Thread: Vê activation with aem

Hey guys I need some help I don't want my tuner to spend alot of time trying to figure out how to turn on the vvl. Was wondering if you guys who are running aem on a vê could help me out either by instructions or sending me a base map. Pm me if you are willing to send me a map thanks.

What are your mods? I could send you a AEM EMS V2 base map but my setup is no where near stock VE any more (MAP, COP, injectors, 6 speed, etc).

My tuner uses two signals on the AEM for VVL, the first is the honda VTEC signal for one cam and an RPM trigger for the other. This gives the same result and can do it by RPM, Load, Gear, and anything in between.

Built motor map boost by gear still on stock dizzy 740cc injectors ye that would be awesome man my tuner will change the values after.

Which pin out is the vtec signal I'm running a 30-1600 v2

i used injector 6 output. worked flawless. We had trouble with using the vtech signal and had to switch it to inj 6.

So both wires to injector 6?

i have done with a relay and use the signal to energize the relay

i have done with a relay and use the signal to energize the relay

- - - Updated - - -

i have done with a relay and use the signal to energize the relay