Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Help with wiring an innovate mtx-l

+ Reply To Thread
Posts: 1-3 of 3
2016-03-03 00:11:37
Help with wiring an innovate mtx-l
How do you wire the innovate mtx-l to the nemu? I've looked with no answer. My mtx-l has 2 special connector plugs on it that say in and out with 3 or 4 wires on it that has a special cable that plugs into the laptop via serial port I think. I haven't been able to log anything because I haven't hooked up the wideband to the nemu. And help is appreciated. Thanks
2016-03-03 02:37:49
Yellow wire to adc box. That's it.
Last edited by zeneffect on 2016-03-03 at 03-36-04.
2016-03-03 18:18:33
Zeneffect is 100% correct, it could not get any easier. You will have to modify a few parameters in the tune to get the wide band to be accurate on the NEMU.

The NEMU also allows for direct wide band connections. This allows you to plug your laptop into the NEMU and the wideband at the same time, and gives you more accurate, reliable and quicker AFR readings then if you just connect via the yellow wire.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top