Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Need your guy's input!

+ Reply To Thread
Posts: 1-9 of 9
2015-12-10 00:39:30
Need your guy's input!
I need your guy opinion on this bin..
if some of you guys that have tuning experience can give it a look over, I just want to make sure that the bin is safe!

my setup B13, W10 Avenir, MSD 50lb injectors, N62 MAF

2015-12-10 08:21:02
Eh, just screenshot your timing map.

If the AFR is OK at all loads, we don't need to see anything except the timing map. Only that plus your compression ratio can tell us how "safe" your tune is.
2015-12-10 12:26:49
compression is 8:5.1
Last edited by MAKVELY on 2015-12-10 at 19-37-43.
2015-12-10 20:07:05
Holy .jpg batman.

Looks safe to me. But, your timing up top is a bit strange. It doesn't seem to alter much past 60% of the load scale. Compare it with a N62 SR20DET map, which goes pretty low up top:

Anyone else wanna chime in?
2015-12-10 20:58:28
yeah i looks weird specially when seen in graph

check it out
2015-12-11 18:32:48
you must substract 128 from red cells (knock feedback cells)!
2015-12-11 23:27:20
watch your AFR's and you should be fine with that timing map .........................

obviously make sure its not pinging / detonation etc and running lean in boost
2015-12-12 05:20:01
Hey Hauling200sx what program were you using to Data Log when you had Calum basic ecu?
2015-12-13 23:50:03
I used tunerpro or nismotronic (no longer for basic boards/ RT nemu boards only now) for basic boards.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top