Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Please help me get my vvl p11 to clear its cel!

+ Reply To Thread
Posts: 1-7 of 7
2015-06-27 22:16:33
#1
Please help me get my vvl p11 to clear its cel!
I'm using the b14 rt XDF found in Vadim's "beginners guide to tuning" and downloaded the bin already running my ecu (it came installed in my ecu) and I can't figure out why my check engine light is on (the code reads both front and rear o2 sensors) I replaced both sensors, reset it using a friend's scan tool and it popped back on a few miles down the road. Now I'm trying to use tuner pro rt to turn the light off so I can register my car. Can anyone PLEASE help me? Why are my o2 sensors throwing a CEL? How do I turn them off using tuner pro rt? I need to get my car registered so I can start driving it again but it wont pass em/insp with the cel light. I'd really appreciate any help guys.

Car specs :
I have an OBDII calum RT V2 ecu ( b14 ecu)
1999 infiniti g20t
Sr20ve
N60maf
N1 cams
2015-06-30 03:22:24
#2
Post the xdf and bin you are looking at
2015-06-30 16:27:22
#3
I'll do that tonight. I'm guessing I can just attach the file from my computer?

- - - Updated - - -

I'll do that tonight. I'm guessing I can just attach the file from my computer?

- - - Updated - - -

I'll do that tonight. I'm guessing I can just attach the file from my computer?
2015-07-01 13:37:41
#4
Please help me get my vvl p11 to clear its cel!
It might be the fact that your probably using a 95-97 or 98 ecu in a 99. Some wires might need to be repinned. (Which might be the o2's) search this


Sent from my iPhone using Tapatalk
2015-07-01 14:37:43
#5
Haulin200sx is right

How to correctly use a 94-97 B14 ECU in a 99 P11
2015-07-27 07:34:02
#6
[ATTACH]827[/ATTACH][ATTACH]827[/ATTACH]
here is the b14 xdf I'm using.
2015-07-27 07:55:36
#7
I repinned the harness when I did my motor swap but I never made the change to a 3 wire rear o2 sensor. I ordered a 18mm to 12mm adapter so I can hook up a 3 wire o2 and see if that helps. I cant seem to find my .bin. I'll have to plug my comp into my car and try to get it again. Thanks for your help guys, I'm sorry I was so slow to respond. I'll be better about prompt responses for those of you making the effort to help me.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top