Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: CNP/COP conversion for OEM ECU

+ Reply To Thread
Posts: 171-180 of 182
2016-04-27 18:36:50
#171
Originally Posted by ebinkerd
Serpentine belt broke. Some how it got wrapped up in the fan hub and another pulley. When it bound up the fanhub and fan broke off of the water pump and went through the radiator then got lodged between the radiator and crank pulley.


WOW!

Originally Posted by ebinkerd

So the tally is as follows: Crank pulley, water pump pulley, water pump, radiator, fan, fan hub/ clutch. While I am at it, timing belt, plugs, wires, cap and rotor (maybe CNP conversion with some ls1 coils).

Haha...do it!
2016-04-27 18:38:26
#172
Originally Posted by ebinkerd
Since no one sells just the connector, I figure this would be good for gander.



Maybe find it here? I find all sorts of neat connectors here for Nissans. Wiring Specialties - Aftermarket Wiring Harnesses
2016-04-27 19:40:09
#173
Originally Posted by Kyle
Originally Posted by ebinkerd
Since no one sells just the connector, I figure this would be good for gander.



Maybe find it here? I find all sorts of neat connectors here for Nissans. Wiring Specialties - Aftermarket Wiring Harnesses


I think he wants the pin header from a 32 bit ecu.
2016-06-02 10:01:07
#174
Xterra is almost done, waiting on the last few parts.
2016-06-10 12:31:12
#175
My devotion to this project has hit an all time low in the past 6 months. I desire to see this controller installed on peoples cars, but I lack the time to finish it completely. So to help expedite the development process I will be sending out 5 boards to those that want to help. By no means is this a free COP controller that someone can do with what they want. These are loaner boards. BUT to those that do participate, install and test; they will receive a production version for free. No feedback = no free production COP controller. This is not for beginners. Extensive wiring will be needed.

So if you are capable and willing to shell out the time and money to help develop this project, please shoot me a PM. Email will be quicker since I am not on the Dash often. [email]binkerd@gmail.com[/email]
@JKTUNING I haven't forgotten about you
2016-06-10 12:38:53
#176
@wildmane He seems good with electronics?
2016-06-10 22:17:40
#177
I'd be willing to give it a shot but I have a lot on my plate already. I could spend a couple hours on machining if you wanted to get a prototype cas cover made, that'd be more my speed right now.
2016-06-11 11:50:06
#178
@wildmane That would be really helpful actually. When I have a more solid approach to the final design, I'll take you up on your offer. Let me know if you change your mind though.
2016-06-12 04:26:27
#179
Unfortunately I am not on the level needed to participate,but...
You should definately post a separate thread about this demo/testing idea so it doesnt get overlooked here.
I would love to see this project get completed,but honestly,I am more the end user buyer when its plug and play ...just being honest
2016-06-12 18:42:09
#180
@zeneffect maybe ?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top