Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: AEM 2 series timing errors help

+ Reply To Thread
Posts: 51-56 of 56
2015-01-01 16:31:20
#51
I cant igniton sync and get the car in timing mode if it wont idle its should at least stay on and be rought idle
2015-01-01 22:16:44
#52
Originally Posted by 200sxmia
I cant igniton sync and get the car in timing mode if it wont idle its should at least stay on and be rought idle


then disable fuel and have someone crank motor over while you use the timing light, giving the starter a break so it doesnt burn out...

motor is really easy to turn over if you pull all the plugs....
2015-01-03 22:29:13
#53
Car started cold i try to set the timing seem to sync is right but nothing after wordsI
Last edited by 200sxmia on 2015-01-07 at 01-41-14.
2015-01-03 22:37:07
#54
Just to be sure you lock timing first (i set to 15) then start the car then use a timing light and make sure the ecu and car have the same timing using little arrows on the aempro software
Last edited by 200sxmia on 2015-01-07 at 06-25-42.
2015-04-14 12:58:33
#55
Another update i got the car running again still have timing errors changed the alternator and starter harness still nothing im try a sheild the wires to the dizzy see if that helps im not giving up
Last edited by 200sxmia on 2015-04-14 at 13-00-16.
2015-04-14 16:35:49
#56
Originally Posted by 200sxmia
Another update i got the car running again still have timing errors changed the alternator and starter harness still nothing im try a sheild the wires to the dizzy see if that helps im not giving up


have you contacted aem??? their customer service is good from my experiences when I have called them in the past.. it seems that you have tried everything that everybody else has when they ran into this issue.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top