Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Need a Bin file for Nismotronic

+ Reply To Thread
Posts: 1-6 of 6
2013-08-27 04:08:11
#1
Need a Bin file for Nismotronic
I have an Aveneir Sr20det, N62/450cc inj and I've looked into the option to create my own bin but it doesn't have one for a det, other than the GTIR/U13.
2013-08-27 05:13:38
#2
I used to run a z32 maf and 440 sti injectors on a det. Had a 2871r turbo, but might work if i have a backup somewhere. Was a RT tune tho not SA.
2013-08-27 05:16:42
#3
http://db.tt/hTvreClf

Best I can find is a RT file for z32 and 555cc injectors.
2013-08-27 06:02:45
#4
load up a sr20de TCD and set the injectors to what you have, then goto the setup tab --> MAF LOAD --> vq table and set your maf.. when your done with that save it as your own (dont save it over the one you loaded)

next upload that shit to the ecu and try to start the car, if it starts up fine thats good let it warm up to operating temp, once its there you can goto the next table down --> parameters and adjust the MAF LOAD FACTOR untill your idle afr is around 14.7..

from there on its all tuning.. if you thought there was some kind of magic "Bin" you could just load up and have a perfect tune im sorry to say, thats not happening.. these startup calibrations are merely to get the car running so you can tune it or take it to have tuned..
2013-08-27 12:18:27
#5
Originally Posted by Mr.
I have an Aveneir Sr20det, N62/450cc inj and I've looked into the option to create my own bin but it doesn't have one for a det, other than the GTIR/U13.


...........DET TCD are actually present in the startup calibrations folder

There really isn't much between the DE, DET and GTI-R except for timing (higher compression runs a less aggressive timing curve.........which Nismotronic gives you the capability of changing the timing anywho so that point is moot)

Follow what Lynch has mentioned and that's it. It's just a base map and nothing else. The rest is on you, the end user to sort through
2013-08-28 02:42:01
#6
You can also shoot me an email and I can send you something to get you started.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top