Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: URGENT help :/

+ Reply To Thread
Posts: 31-35 of 35
2013-08-20 05:11:42
#31
Sorry i should have been more clear about the solution, this sounds like what the problem is.

There are 2 sections on this site for Tuning, the tuning folder, and further down the Nismotronic folder, the thread i posted link to is in Nismotronic, I only ever used to go to Tuning, not knowing there is a Vendor page with information like this.

Pretty sure this should get things going for you anyway.
2013-08-20 14:59:37
#32
Before heading to school I snipped the 3 consult wires and alas live data!

I love the shit out of this forum! Thanks fellas!

The car is running at its best ever.
2013-08-20 15:04:33
#33
Originally Posted by circa.13
Originally Posted by Evlnxr
Ok thats cool, have you cut the stock consult wires on the ecu plug?

http://www.sr20-forum.com/nismotronic/58796-logging-values-not-being-displayed-fix-here.html


Oh no.......

something needs to be snipped on the stock harness?!

I will try that for sure tomorrow


This isn't always the case, BUT on some vehicles you will need to remove the pins from the ECU connector at pin location 7, 14 and 15.

You can do this very easily by taking a very small screw driver and releasing the tab that holds the pin in the connector and then pulling it out from the back side. This way you don't have to cut the wire and can return it back to stock very easily.

The base TCDs that are included are tuned for the VE, but a lot of people use a different MAF setup so that will need addressed upon initial upload.

I am still working on getting the tune repository up, so users can upload TCDs for everyone else to try out if they so desire.
2013-08-20 15:24:26
#34
Originally Posted by JKTUNING
Originally Posted by circa.13
Originally Posted by Evlnxr
Ok thats cool, have you cut the stock consult wires on the ecu plug?

http://www.sr20-forum.com/nismotronic/58796-logging-values-not-being-displayed-fix-here.html


Oh no.......

something needs to be snipped on the stock harness?!

I will try that for sure tomorrow


This isn't always the case, BUT on some vehicles you will need to remove the pins from the ECU connector at pin location 7, 14 and 15.

You can do this very easily by taking a very small screw driver and releasing the tab that holds the pin in the connector and then pulling it out from the back side. This way you don't have to cut the wire and can return it back to stock very easily.

The base TCDs that are included are tuned for the VE, but a lot of people use a different MAF setup so that will need addressed upon initial upload.

I am still working on getting the tune repository up, so users can upload TCDs for everyone else to try out if they so desire.


Cant wait for that repository.
2013-08-20 17:11:51
#35
Glad you got it running!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top