Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Calum Basic bin question

+ Reply To Thread
Posts: 1-10 of 12
2012-10-10 18:17:39
#1
Calum Basic bin question
I have DE chips that were in my OBD2 Calum and want to know if they will work correctly in an OBD1 Calum.
2012-10-10 20:18:02
#2
Yes they will as long as the are the same size, the only thing that changes is the bin off course and the adr file.
2012-10-11 19:34:27
#3
So I'll just need to find someone to burn the correct bin on these chips? Thanks for the info!
2012-10-13 12:32:59
#4
how do burn on b13 basic ecu? anyone ? so load 2 bins to burn?
2012-10-13 12:45:23
#5
Originally Posted by bhowle
So I'll just need to find someone to burn the correct bin on these chips? Thanks for the info!


If you have the correct bin you can email it to me and I can burn it for you.,Let me know.
2012-10-16 15:00:40
#6
@SGT

do you have a guide how to burn a bin on chip? let say using flashnburn and chip burner1

how do i burn 2 bins on the chip?
2012-10-16 16:54:33
#7
You only burn one bin on both chips, they have to be the same.

Check the old Calum section, i believe he had write ups on how to burn chips.
Last edited by squirlz on 2012-10-16 at 16-55-15.
2012-10-16 17:19:21
#8
Originally Posted by SGTSR20
Originally Posted by bhowle
So I'll just need to find someone to burn the correct bin on these chips? Thanks for the info!


If you have the correct bin you can email it to me and I can burn it for you.,Let me know.


Thanks! I will see if I can find a good DE bin and send it to you with my chips.
2012-10-16 22:08:43
#9
Originally Posted by squirlz
You only burn one bin on both chips, they have to be the same.

Check the old Calum section, i believe he had write ups on how to burn chips.


What he said also you can go on moates.net has a bunch of tutorials you have to dig thru them cause they have a lot of different tutorials.
2012-10-17 15:35:37
#10
i got the basic b13 nissan 20x2 board. with a switchable features. i try ask support on moates but don't have clear instructions.. anyway they said the chip can support 2 tunes since it has a switchable features so want to know how to burn it on the chip like

tune1.bin load buffer write verify

after

tune2 bin load buffer write verify?

thanks.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top