Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: AEM help

+ Reply To Thread
Posts: 11-18 of 18
2012-08-11 19:34:42
#11
Ok its running...

Dont have time to set the ignition yet since its raining again...

I also suspect it to be too rich at idle during warmup.
2012-08-11 21:21:16
#12
Awesome, I expect more news tomorrow!

Sent from my SCH-I535 using Tapatalk 2
2012-08-11 21:24:15
#13
Originally Posted by coach
Awesome, I expect more news tomorrow!

Sent from my SCH-I535 using Tapatalk 2


sadly not. Im going to watch the autox tomorrow, and it will be raining off and on again tomorrow. But when I can set the timing and load my smoother ign map, i should be set.


EDIT
I dont know how its affected it yet, but i also have the injector phasing set to 8 (since the s15 is 4 and mine was 14)

But with the ign sync set to basically what it was for the s15, that was it, but i had to give it some gas for it to stay running.
Last edited by unijabnx2000 on 2012-08-11 at 21-26-01.
2012-08-11 21:34:30
#14
was it smooth though? It wasn't breaking up and stuff was it?

Brent
2012-08-11 21:43:50
#15
Need to mention that I owe a ton of thanks to Benfenner for all the help and answer my 1000 questions during this process.


yeah the coils are great. it rev'd just fine, but my idle during warmup seems to be too rich, thats why it killed itself after about 2-3 seconds of running on the initial try.
So when i tried again, i had to tap the gas pedal to keep it running, then it was on it's own.
Last edited by unijabnx2000 on 2012-08-11 at 22-39-59.
2012-08-12 04:18:07
#16
Just Ben Fenner! Dang it, I thought my suggestions actually helped you! LOLOL

Brent
2012-08-14 01:32:40
#17
Originally Posted by coach
Just Ben Fenner! Dang it, I thought my suggestions actually helped you! LOLOL

Brent


You have helped too
2012-08-14 01:52:15
#18
na, its cool, I understand. I will know more I guess when I attempt my start up.

Brent
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top