Thread: Fustrated about this harness

Ok so I have a 92 b13/sentra se model, and doing a ga16de swap to a sr20de swap. i've got everything i believe besides the axles. I have the sr20de, transmission, mounts, shift linkage, ecu, fuel pump, etc.... i know how to install all the parts, i'm just not an electrical tech guy when it comes to wiring.

So far i've already taken out the ga16de and exchanged the main engine harness from the original ga16 to the sr20 harness. under the dash along with the ecu the white sr20 harness plugs up with my ga16 harness under the dash perfectly with some 1 or 2 miss matched pins but was told it should be fine. what i'm really confused on is the harnesses by the tranny in the engine bay since no one ever really seems to talk about it.


http://i256.photobucket.com/albums/hh193/jwa6975/100143.jpg

if you look at this picture, i have both the ga16 and sr20 one. only the big one seems to fit and i'm confused on what to do about the other 2 harness (circled in green) plugs and the one empty slot harness not plugged into (on the left of that bigger harness). apparently the sr20 has 3 and the ga16 only uses 2. i'm confused as to what to do about this. i actually want to avoid as much rewiring as possible. some please help me with either pictures or a simplified explanation on what to do. thanks everyone.

oh yeah forgot to add, my car is a 92 sentra se model and the parts i'm using came off of a 92 ser. if that helps