Thread: can't load map on calum rt

That's why you must test and make sure it works before going out .

So you downloaded the driver and installed it, and still nothing?

yes sir, im going to play with it today while im at work

nvm, im a retard, teaches me to skim threw stuff fail on my part

b14/s14 realtime v1, has a problem, and the other one says b14/s14 doesn't have a driver, been tryin to figure this out for a few days, in need of some help, iv installed both drivers off the tunerpro site

Don't get the drivers from TunerPro site, get the drivers from here: Virtual COM Port Drivers

thos are the ones I downloaded, looks like I'm gonna have to put my old injectors n fuel rail back in lol

What OS are you running? ALso when you plug your ECU into a usb port, in device manager do you see it trying to connect?

Windows 7, and yea it connects and trys to trouble shoot

im going back monday around 5:30-6:00est, mind if i have the tuner give u a call for a min to figure this out?

There is no point if you can't get it connected and working at home. Windows 7 might call for a different driver installation. But it really should be as simple as, install driver, plug ECU in, ECU gets installed by Windows. With ECU plugged in start up TunerPro and it should recognize it, if it doesn't then you need to select the correct port in Options.

Also it looks like the ECU likes to be on lower ports, like 0-9 instead of 10+ port numbers.