Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: can't load map on calum rt

+ Reply To Thread
Posts: 1-10 of 20
2012-01-22 16:41:22
#1
can't load map on calum rt
tryed to use tunerpro to load a map on my calum rt, can I not use tunerpro, or do I actually need to have tunerpro rt
for it to read my ecu?
2012-01-22 18:44:06
#2
tunerpro rt is what you need. v5 is out, you could still get it for free i believe.
2012-01-22 19:43:23
#3
cool thank you, just on the tunerpro site?
2012-01-22 19:50:11
#4
I used a program called emutility to load my RT but this was the first gen RT.
2012-01-23 14:01:56
#5
Originally Posted by Benito
I used a program called emutility to load my RT but this was the first gen RT.


Should all else go wrong, this is it, EMUtility. But Tunerpro RT should load it alright.
2012-01-24 03:55:33
#6
i have rt open and the file selected, but nothings showing up in the parameter tree, am i doing something wrong here??
i see my file name on the top, but it wont let me find it in xdf
Last edited by JaxMarcus on 2012-01-24 at 04-23-24.
2012-01-24 06:08:23
#7
Originally Posted by JaxMarcus
i have rt open and the file selected, but nothings showing up in the parameter tree, am i doing something wrong here??
i see my file name on the top, but it wont let me find it in xdf


Go XDF -> Select XDF and browse to the relevant XDF file.

Everything your looking for should be answered here: http://www.sr20-forum.com/tuning/40511-beginners-guide-calum-ecu-tuning.html
2012-01-24 16:36:24
#8
got it! wish me luck dyno later!
2012-01-24 16:57:38
#9
Originally Posted by JaxMarcus
got it! wish me luck dyno later!


Good luck! Post up some numbers before and after
2012-01-25 05:11:06
#10
ok failed, said i do not have the calum rt v1 driver, and i did dl the drive from the beginners guide
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top