Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: G20 ecu on a DE Highport

+ Reply To Thread
Posts: 1-10 of 16
2011-11-15 15:22:23
#1
G20 ecu on a DE Highport
hello everyone!....

I just want to know what is good g20 ecu code that will fit on my sr20de highport...

I heard G20 ecu has 7.5k limit and has no speed limiter... So I'm planning to buy for my DE.. Can anybody help me what is the suit for it?

Thanks
2011-11-16 06:51:23
#2
Highport=91-93. Highport ecu's hve no speedlimiter and have a 7.5k redline.

What car/ecu do you currently have?
2011-11-16 06:54:06
#3
Originally Posted by nibbz9999
hello everyone!....

I just want to know what is good g20 ecu code that will fit on my sr20de highport...

I heard G20 ecu has 7.5k limit and has no speed limiter... So I'm planning to buy for my DE.. Can anybody help me what is the suit for it?

Thanks


This was a nice upgrade for B14's I believe as I had one in my 98, Not B13s as we already have the 7.5k limit and no speed limiter.

I believe late P10's had OBDII ECU's that were similarly spec'd to there OBD1 couterparts.
2011-11-16 07:18:00
#4
thanks for your reply..

actually currently i have sr20de transplant on my b13.. not sure but it has written 53J on 53J00 on maf..

currently it has 7.2k limit...

not sure this engine which came from but this might be come from nissan bluebird altima 94..

It's OBD1
2011-11-16 14:14:56
#5
Something doesn't sound right, obd 1, b13 & you have a 7200 rev limiter? They should have 7500(which usually will read a little higher on the stock tach) & no speed limiter already. Is it an usdm b13? Not sure where you are from & if there might have been a difference out of country. Maybe your tach is off in a different direction than normal?
2011-11-16 15:46:50
#6
53j are the jdm (japanese) sr20 ecu and maf code
they have speed limit of 180kph and rev limit bet. 7200-7500 rpm
2011-11-16 16:03:01
#7
We will need more info on the car setup. I'm guessing you have a bluebird swap with bluebird ecu? If this is the case then keep the blebird ecu until you get a chipped ecu or a jwt.
2011-11-17 01:23:25
#8
thanks to all your replies....

yes i have a bluebird swap on my b13... with bluebird ecu... it's jdm engine which has speedlimiter and rev limit of 7.2k... though i was just trying to stick on this but i just need some a little power.. currently i do have all stock sr20de.. just want to raise a bit on 7.5k rpm..
2011-11-17 02:13:21
#9
Only way is to get a jwt ecu ora chipped one. Either way you will need to swap over to usdm sensors.
2011-11-17 03:18:26
#10
Originally Posted by P10FTW
Only way is to get a jwt ecu ora chipped one. Either way you will need to swap over to usdm sensors.



not correct ....his only options are not only to chip or jwt ..he can use a usdm ECU and MAF and he'll be fine ....no other sensor will have to be changed
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top