Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: need sr16ve n1 bin

+ Reply To Thread
Posts: 1-7 of 7
2011-03-10 17:54:52
#1
need sr16ve n1 bin
wondering if anyone has a bin for a sr16ve n1. im running a sr16 harness so i dont have the 8 injectors. i dont even know where to start to be honest with u.

thanks
2011-03-10 18:18:45
#2
What kind of ECU management are you running?

Also post MAF and injectors (i guess 333cc)
2011-03-10 18:22:42
#3
im using b13 calum basic, ve maf and 333cc
2011-03-10 18:36:16
#4
Are you using a OBDII-OBDI jumper? IIRC you drive a B14

Maybe I could help you out with your actual bin, what would you like to improve?
2011-03-10 18:38:17
#5
its a sr16 harness. obdI. i wish the previous owner left the b14 shit alone but for some reason he didnt. reason im asking for one is for some reason ive had issues with this ecm ever since i got it from calum. idle issues, intermittenly goes crazy lean when it doesnt like me. doesnt happen much but sucks driving it with the fuel trim going to 17-22 AFR. after a while it gets back to normal but i wanna get it to where i dont have to worry about it.
2011-03-14 01:18:07
#6
This is a stock N1 bin, cant remember if its ver1 or ver2 though, I guess if you look at the rom ID the revision number will indicate which one it is.
2011-03-25 15:30:44
#7
i believe this is ver1, vvl activates at 6300/6550. and the ignition timing shows it is.

ver2 only has a single vvl point at 6700 or something. cmiiw

you can definitely use this bin as reference to you tune in sr16ve
Last edited by alpha on 2011-03-25 at 15-34-10.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top