Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Need a quick favor for those with Calum Realtime

+ Reply To Thread
Posts: 1-4 of 4
2010-11-13 06:35:57
#1
Need a quick favor for those with Calum Realtime
Instead of me downloading the realtime program onto my new laptop, i was wondering if someone with the program loaded can load Calums det 8.5:1 740cc injector@ 3 bar, z32 maf tune for the B13 realtime and take a snapshot of the timing map for that tune and send it to me.

Please please, thanks a million to whoever comes through.

Im needing this to kinda transfer the numbers over to get an idea for my aem timing map. I had this tune and had 0 issues with detonation running 20psi pump 91 octane and 30+psi on C16. So i really would like to run a similar map to keep things safe to start with.
2010-11-14 03:16:46
#2
There is a good chance the tune you are talking about will have this timing: http://www.sr20-forum.com/tuning/22279-timing-maps-tuning.html#post288937
2010-11-14 07:17:38
#3
22 deg seems like a lot. But again at 30 psi i would only run C16 so i probably had no issues getting away with it. But hell even on 91 octane pump gas and 20 psi even in the 115 deg summer heat during the middle of the day i still had zero detonation issues. That was at over 400whp. I was thinking with the new 67mm T3 H.O. that im gonna run, more in the 19-20 deg range up top. I plan to run up to around 35psi which should put me very very close if not just over 700whp. Ive seen what 700whp evos run for timing maps on C16 and its about 20-21 deg up top.

Vadim, can you load the bin for that tune i posted up. I know its in the Calum section. Just to make sure and if its the same just let me know. Thanks man.
2010-11-14 22:15:24
#4
Attached is a different tune, little more conservative but is a B13 tune.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top