Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VE+T25 Bin?

+ Reply To Thread
Posts: 21-25 of 25
2010-10-16 06:23:52
#21
just watchout for your timing and dont get too greedy. shouldnt be to bad
2010-10-16 18:34:37
#22
Just run a 9:5:1 setup, wth the high lobes on the VE it allows to run a little higher compression due to the overlap. And also the 9:5:1 bin has a very conservative timing map, should not worry at all if you guys run at least 91oct.
2010-10-17 00:23:32
#23
I have a det bottom end (8.5cr) with a ve head, so im guessing thats goint to give me about 9.3ish compression. so this bin should be fine with my t25 at about 15 deg timing correct?
2010-10-17 15:00:20
#24
Yup, as long as you got the right maf/injector combo.
2012-01-08 03:49:30
#25
Bump
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top