Standalone post-start enrichment
To the standalone users: What settings are you using for post-start enrichment?
Here are mine, the EMS I'm using (Link G4) expresses it as a percentage of the main fuel table. When it's stone cold (30deg-) it's fine, when it's hot (70deg+) it's fine, but in between the post-start mixtures seem to be a bit off.
The symptom is that once the engine fires (and I never, ever have to crank it for more than 3sec to do so), the revs will reluctantly pick up and hold at about 500-600rpm until 6-10sec afterward, when the post-start enrichment has decayed sufficiently.
Here are mine, the EMS I'm using (Link G4) expresses it as a percentage of the main fuel table. When it's stone cold (30deg-) it's fine, when it's hot (70deg+) it's fine, but in between the post-start mixtures seem to be a bit off.
The symptom is that once the engine fires (and I never, ever have to crank it for more than 3sec to do so), the revs will reluctantly pick up and hold at about 500-600rpm until 6-10sec afterward, when the post-start enrichment has decayed sufficiently.