Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: So what are you guys using for burners?

+ Reply To Thread
Posts: 1-3 of 3
2009-11-23 14:28:58
#1
So what are you guys using for burners?
Guys I recently purchased a moates basic burner to tune my SR20VE-T G20. Currently it has an Oldman chipped used in conjuction with a SAFC. Wanted to dish out the cash for the apu1, but that will be for later I realy want to get the hang of this. I also saw that there was Willem burners also. Are there any more out there and which are the most user friendly?

I bought the moates basic burner for two reasons:

1 Relatively cheap
2. Common so there is quite a bit of support

Any tips/tricks that can help with the tuning would be greatly appreciated. I will be ising the burner with tunerpro RT.
2009-12-12 08:58:28
#2
MCUmall Electronics Inc. A low cost EPROM EEPROM Atmel PIC I2C SPI programmer online store

I have one of those, i got it as i deal with different kinds of eproms for work and car stuff so needed the flexability of being able to use adapters for different kinds of chips. Haven't had any problems, programs chips quite fast and runs on power from the USB port for all the stuff i usually program.
2009-12-19 06:35:21
#3
I have a moates burner. So easy, a caveman can do it.

Here's a how-to: HOW TO: Burn a rom with the Moates Burn1 - SR20 Forum
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top