Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Timing Maps for Tuning

+ Reply To Thread
Posts: 91-100 of 156
2011-02-20 17:36:41
#91
Originally Posted by Will
right, z32 and 370s at 4 bar for the moment. I have some 740cc nismos about to go in.

I am a little concerned with the MAF voltage, its maxing out around 4.3v, which seems rather high. Does the z32 go to 5 or 6v?

I suspect a boost leak off of the manifold somewhere, the IC piping is fine. My a/f ratio is perfect so its hard to believe a boost leak is happening, but maybe.


your tp will drop when going up on injector size. tps voltage is fine. I see alot of cars with tps in the low 4 volts. Ive seen some cars stay in the high 3 volts even with a new tps.
2011-02-20 17:41:11
#92
Originally Posted by supercowboy
your tp will drop when going up on injector size. tps voltage is fine. I see alot of cars with tps in the low 4 volts. Ive seen some cars stay in the high 3 volts even with a new tps.


Cool, thanks a lot for the input.

I find it strange that i'm maxing out my 370s at 4 bar at like 98% duty only running 11.5psi when I only hit 86% making 286whp on the dyno. I suppose it was hotter at the dyno and I am tuning super rich...
2011-09-20 00:51:18
#93
Timing maps SR20VE
Timing maps for SR20VE with SR16 CAMS non N1?
2011-10-12 17:36:36
#94
^^ need that 2!!! i made one myself but need to compare to others as a guide!
2011-11-02 03:02:25
#95
keep this alive ....any timing map for the eder 45 asked for?
2011-11-02 03:25:51
#96
N1 and SR16 should be fairly similar, if anything N1 might have even less timing due to higher lift and duration.
2011-11-23 00:16:27
#97
Anybody have a timing map for a sr20det it has cp 8-5-1 ,740cc,s3 cams,aem Or can tell me where it should be bottom end if fully built .
2011-11-23 01:19:28
#98
Out of the specs you gave us only two things matter. 8.5cr and S3 cams. It should fairly similar to any DET map though.
2011-11-23 16:21:07
#99
Anyone, with a Basemap for a AEM EMS? i was looking at the Base calibration and the timing map look weird... with negative numbers and things like that... any help? Is for a SR20DE
2011-11-23 17:04:41
#100
Ve-T 9.0.1cr stock cams
How about VE-t 9.1.cr, nismo 740,z32,Nistune Ecu
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top