Thread: Wrench size for Nissport plug?

I have this installed in my header:

NISsport EGR Header Plug for SR20DE

And I need to go buy a wrench that fits it. I'd rather not buy 3 or 4 then return the others. So any help would be appreciated as to what size this plug is. I can't seem to remember off the top of my head.

Why not use an adjustable wrench, or use an adjustable wrench to measure the bolt then compare the sizes in the store

Grab an adjustable wrench and just take it off. Once it breaks loose it'll just spin off anyway.

[email]sales@nissport.com[/email]
email them and ask.

or just measure it

15/16 metrix or 24 mm wrench....both are the same...

Adjustable wrenches suck. They are good for one thing. Stripping bolts. I prefer to use the correct tool for the job.



The last time I had an interaction other than ordering something off their site I basically got a big F.U. from them. I'd rather not deal with them if at all possible.



Forgot I bought myself some digital calipers about a month ago. I guess this is the perfect time to go use them I'll go confirm this guys reply below after work today.



Thanks for the reply. Exactly what I wanted. You the man

Correction.. Only "cheap" adjustables strip bolts.. Thats the big misconception. If you spend a few bucks on a good adjustable you will see a HUGE difference. The higher end crescent wrenches stay tight and straight. I have never stripped one bolt or slipped off with my "good" wrench. The cheap silver ones just bust up everything.

Heres my recommendation:



I've done great with this thing and its not too pricey.
They range from $8-$16
Never stripped one bolt or loosened up on me.

I need this part badly like now 2 day service


NS-2100


Is there a member on the forum who runs this site so I can call them.