Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NismoTronicSA Update: 3.12.002 | Wideband AFR conversion and Recovery Files

+ Reply To Thread
Posts: 1-5 of 5
2014-05-10 20:58:29
#1
NismoTronicSA Update: 3.12.002 | Wideband AFR conversion and Recovery Files
1) Added to this version is an update to the way the program calculates your AFR based on the o2 voltage.

If you are using an Innovate wideband then this will likely alleviate any need for an AFR offset in the program to get your software to match the gauge!

This also adds the NGK AFX to the wideband type drop down list.

2) Also, I added a recoveryTEMP.tcd file that gets generated if you have a TCD open and the program is forced to close.

It will prompt you the next time you launch the program if you want to load from the recovery file or not.
2014-05-11 22:34:18
#2
Sweet, great to see more updates.
2014-05-11 22:44:54
#3
right on john!

anything you can do for those of us with the zeitronix widebands? or are we ok on that whole o2 voltage bein calculated aspect? i do have to change my offset a bit for it to match, tho its not a big deal.
2014-05-12 16:41:28
#4
Originally Posted by lynchfourtwenty
right on john!

anything you can do for those of us with the zeitronix widebands? or are we ok on that whole o2 voltage bein calculated aspect? i do have to change my offset a bit for it to match, tho its not a big deal.


This conversion fixes ALL of the conversions that do not have a integer scalar and/or offset value.

You still may need to apply a little offset to get it to match, but overall it should be much closer.
2014-05-12 16:44:39
#5
Awesomeee! Thank you, sir.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top