Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: strings crossing

+ Reply To Thread
Posts: 1-10 of 11
2013-10-09 02:32:43
#1
strings crossing
so heres an example of what happens sometimes..

i'll be in the 2d map makin adjustments with the arrow keys and +\- keys and when i close the 2d map my actual map numbers change randomly to some crazy shit and it ends up crossing lines big time..

whats even more weird is i can fix it in the fuel map without using the 2d map again and hit save, but when i load the map again this is what it looks like in either case..




it doesnt always happen.. sometimes closing and reopening the program helps..
2013-10-09 11:29:42
#2
I too have had this problem. This started happening shortly before the program started crashing. I've found its best to keep any saving to a minimum and when you want to do anything else, save, and restart the program.
2013-10-09 13:32:32
#3
This shouldn't happen, PERIOD.

I use the 2D map editing literally every single time I tune a car and haven't seen this issue pop up EVER.

What you guys need to do, is make note of what you are doing when this happens. What windows you have open, what you are clicking on and when the numbers change.

I do suggest that you only edit the 2D map and then close it before switching through and editing other windows or the main table (although this should not matter, I switch back and forth all the time while tuning).

If you can come up with a way that causes this to happen every time or a sequence of events that causes it, then we can start diagnosing and come up with a fix.
2013-10-09 13:40:11
#4
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.
2013-10-09 14:05:14
#5
Originally Posted by ebinkerd
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.


If you are still using a MAF based load, it will always display in raw data.

I do see an error when using msec and doing direct entry that it will round i to the nearest whole number, which isn't raw data .. just a rounding issue.
Last edited by JKTUNING on 2013-10-09 at 14-07-14.
2013-10-09 14:07:43
#6
Originally Posted by JKTUNING
Originally Posted by ebinkerd
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.


If you are still using a MAF based load, it will always display in raw data.


I have it set to MAP. It only ever happened a few times.
2013-10-09 14:11:33
#7
Originally Posted by ebinkerd
Originally Posted by JKTUNING
Originally Posted by ebinkerd
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.


If you are still using a MAF based load, it will always display in raw data.


I have it set to MAP. It only ever happened a few times.


I think what you were seeing was likely the rounding to the nearest whole number and not actually reverting to RAW data.

It uses the same code every time, so it would happen every time if it was reverting to RAW.

But, I will take a look and made a To Do list that I need to get caught up on as soon as I can and will release an update.
2013-10-09 14:13:25
#8
Originally Posted by JKTUNING
Originally Posted by ebinkerd
Originally Posted by JKTUNING
Originally Posted by ebinkerd
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.


If you are still using a MAF based load, it will always display in raw data.


I have it set to MAP. It only ever happened a few times.


I think what you were seeing was likely the rounding to the nearest whole number and not actually reverting to RAW data.

It uses the same code every time, so it would happen every time if it was reverting to RAW.

But, I will take a look and made a To Do list that I need to get caught up on as soon as I can and will release an update.


Maybe that was the case.
2013-10-10 02:20:58
#9
Usually I have my gauges open and log analyzer.. its super random tho sometimes everythings gravy an other days i have all sorts of issues
2013-10-10 18:15:16
#10
Originally Posted by ebinkerd
This may not be related, but another time I had the fuel map set to mSec and was modifying the values and every input I made set the value to raw data.


I released an update today that fixes this issue.

Also, a change to how you can view a zoomed log and using the arrow keys.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top