Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B13 5 Lug Question (Need Help With Big Brake Upgrade On Rear) 2-4-2012

+ Reply To Thread
Posts: 41-50 of 60
2011-12-30 22:05:33
#41
ive read a TON of threads on this subject.. chect out the b15 forums.. i found some great info there.

i should have my 5 lug swap done in the next couple weeks.. i have already collected all the parts
2011-12-30 22:18:01
#42
hope it goes well for u .
2012-01-01 03:00:17
#43
The best and most efficient way is:

B15 front hubs and spindles and brakes (get hubs redrilled to 5x114.3)

90-94 Maxima rear hubs and rotors and torque member

I make the spacers and sleeves that you will need for the rear setup....there is no way around this because the B13 and B14 have tiny ass shaft's that the rear hub bolts onto and you'll need the sleeve to accomodate this and the spacers to correct the offset of these hubs so that everything is back in alignment.


I also redrill hubs so you can hit me up for that service if you like.

This are some pics of a B15 front hub I am doing for another fourm member, these are being redrilled out to 5x114.3 for use on a B13.





Last edited by UNISA JECS on 2012-01-01 at 03-07-09.
2012-02-04 23:08:40
#44
what to use to do the rear big brake upgrade .
2012-02-04 23:22:15
#45
Jay that might be a very cool idea ^^ redrill the hubs ! Easy and done . No parts to buy except wheels and studs .
2012-02-04 23:25:22
#46
i did maxima rear calipers and rotors.

REAR old vs new

Last edited by tj5854 on 2012-02-04 at 23-28-24.
2012-02-05 03:31:15
#47
Originally Posted by tj5854
i did maxima rear calipers and rotors.

REAR old vs new



ok kool . did u use the maxima capliers and the mounting brackets too . would i have to replace the e cables to the maxima as well .
2012-02-05 03:56:09
#48
Maxima calipers and brackets.. ebrake is stock
2012-02-05 16:23:35
#49
Thanks for the pix n info guys! Keep them coming. I just want to be sure, so after all the interchangeable parts or the Frankenstein parts between maxima, b15 and p10...etc. I can still use stock b13 shocks, correct? I will get coilovers, but I don't want to jump the gun if I have to use a different rear than my fronts...etc.
2012-02-05 17:03:22
#50
Originally Posted by udunnome
Thanks for the pix n info guys! Keep them coming. I just want to be sure, so after all the interchangeable parts or the Frankenstein parts between maxima, b15 and p10...etc. I can still use stock b13 shocks, correct? I will get coilovers, but I don't want to jump the gun if I have to use a different rear than my fronts...etc.


here is my parts list:
FRONT:
b15 spindles & hubs redrilled to 5x114.3
z32 front calipers & 240sx to Z32 brake lines
z32 front rotors drilled and slotted
arp wheel studs

REAR:
maxima hub
arp wheel studs
maxima calipers
maxima rotors drilled and slotted
unisa jecs spacer and washer kit
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top