I can finally post up in this thread again. hahaha.
Re-routed my chassis harness so that its now completely tucked. Mocked up and trimmed the 93/94 front bumper for the intercooler so now its ready for paint. Got my new hood ready to go get painted and cut for the evo 8 hood vent.
Installed the 2J Racing Bump steer kit. Great looking piece and feels solid. I really dont care for the whole bump steer correction part but hopefully it will help keep the steering more solid and eliminate any movement steering wise during launches at the track.
Hooked up all my harness' and verified I can connect to the AEM after I found out that the whole AEM EMS powering off issue was due to metal shavings that had gotten into my harness connector and happened to sit between the eccs power and ground pins causing an intermittent short and causing the car to shut off. Glad it wasnt a problem internally with the board. Everything checked out great and its all ready to go for the motor to be back in.
Unmounted the intercooler to strip the overspray off of it and clean it up.
Installed the door panels and rear panels that i got out of the same 93/94 se-r. Just need to grab the carpet out of it and a couple other panels and then need to find a set of 93/94 rear seat cusions. So if anyone has a set they want to sell, please hit me up.
Installed the TDMI fender washers on the fenders and my trans side 6 speed motor mount.