Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: What Did You Do To Your B13 Today?

+ Reply To Thread
Posts: 241-250 of 4,515
2011-01-16 20:38:35
I actually cleaned out my car today. Over the last 4 years it has become a storage for all sorts of shit. It's time to start prepping and cleaning.
2011-01-16 20:47:06
Installed Philips CrystalVision Ultra headlights and finally put in the instrument cluster LED's that I've had for a year.
2011-01-16 21:45:16

Finally Put The Head Together
Installed The Head Back To The Block
Greased The Rockers & The Cam Lobes
Put The Cams In
Put In Timing
Put The 2 Oil Pans On
Installed The Belts

Tomorrow I Just Have To Tighten Up The Transmission & Put The Crossmember On
2011-01-17 23:04:04

Tightened Up The Transmission
Put The Crossmemer Back On
Put The Intake Manifold On
Put The HP Racing Headers On
Put The Battery To Charge

Update Of As 6:00PM
Car Cranks But I Need To Swap Out Starters
Will Do It Tomorrow
Ran Out Of Light
2011-01-18 05:11:22
Checked the battery again, good.
Checked to see if the starter was getting power, good.
checked to see if there were no shorts, good.
checked the alternator, good.
everything was good but the starter, bad.
so I'll take it to get rebuild after the 25th (payday)

getting some airtime, lol...
2011-01-18 20:30:13

Swapped Out Starter
Jumped Started It


*I Just Want To Thank Everyone That Helped Me In This Fix*
2011-01-18 21:22:58
cleaned up the car inside & out.might even wax it.
cleaned & polished up the rims, sprayed the tire's with that mothers.
check the tires.excellent 80% thread left all around.
put in the new springs.
call to check up on turbo kit should be in/done in by thursday.primeramente dios.
2011-01-18 21:53:57
drilled the drain pug on the tranny due to the plug being seized in the tranny and the plug being chewed up. Another gift from the previous owner.
2011-01-19 00:44:29
Today I fixxed all the boost leaks and pressure tested the system to 18psi.
Over the last week I did a ton of work I.e. Redid ic piping make an oil catch can and moved the bov TWICE.
2011-01-19 01:59:48
Looked @ it, and walked away mad as hell caz dont know wats wrong w ecu/chips..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top