Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What Did You Do To Your B13 Today?

+ Reply To Thread
Posts: 131-140 of 4,492
2010-12-14 04:09:22
#131
Originally Posted by 92SentraSE-R
It's annoying huh... I remember having to do it twice on my bros b14 and there is no room to have it come out..

Today I drove it to the post office then to the store for a total of about 3 miles lol


we removed the passenger side and the front motor mount and jacked the engine up a couple of inches, also removed the coolant overflow and the plastic mount that attaches it to the frame.. it came out with no problem..
2010-12-18 07:27:06
#132
Originally Posted by vqman
we removed the passenger side and the front motor mount and jacked the engine up a couple of inches, also removed the coolant overflow and the plastic mount that attaches it to the frame.. it came out with no problem..


LOL! Man thats a bunch of work.. When I did it I had to remove the coolant overflow and that was it.. If you just remove the alt you can wiggle it out and have JUST enough room to do it.. I had to do it with limited tools on the street =\


Today I side gapped some new plugs. I can't tell if it made any improvements or not because its raining and I wouldn't be able to get traction =\
2010-12-18 10:52:24
#133
2010-12-18 14:36:47
#134
12-18-2010

Bout The Install A Starter In My B13 .
2010-12-18 15:41:25
#135
Originally Posted by 92SentraSE-R
LOL! Man thats a bunch of work.. When I did it I had to remove the coolant overflow and that was it.. If you just remove the alt you can wiggle it out and have JUST enough room to do it.. I had to do it with limited tools on the street =\


i don't know what is different about mine, but there was no way it was coming out by moving only the coolant overflow....
2010-12-18 16:45:01
#136
I put in a new power steering hose and fitted my rear spacers. Now I have to replace some fuses
2010-12-18 18:56:50
#137
I drove it to work today, I just got her back from the shop after 4 months, its with a turboless DET now...
But after it being almost a race car used for DD which sucked big time, Im extremely happy with being back to stock...

When I get home from work I need to fix the drivers door lock
2010-12-18 22:59:20
#138
Installed the pulsar GTI-R Exhaust cam (High Port SR20DE) in preparation for drags tomorrow. Will do a final check tomorrow before heading up.
2010-12-18 23:20:48
#139
I looked at my motorless nx, then went and picked up a 16ve motor and trans .

Stratton.
2010-12-19 00:07:33
#140
Took it to Home Depot and parked it WAY out in left field away from all the pick-up trucks and SUV's.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top