Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Alfred.bin Needed - for N60 maf.

+ Reply To Thread
Posts: 181-190 of 243
2011-10-09 00:47:53
#181
there are 2 thing that will change the kvalue (injection multiplier), thats injector size and maf.

i read alot that people have to fine tune their kvalue their self to get it spot on..
2011-10-09 00:48:36
#182
i have an old calum basic. Today is the most i've every read on the tuning and capiblities.
but it seems like the diffrence in the k value is to get the afr's a lil richer or leaner over what the "math equation" would equal to.
2011-10-09 00:53:39
#183
http://www.sr20-forum.com/tuning/17818-how-change-mafs-bin.html
this thread has the best explaination of what the hell is going on. lol. with the k value stuff!
http://www.sr20forum.com/traditional-rom-board-support/201639-tuning-help.html
this one has alot of info to but way over my head lol.
Last edited by blackb13se-r on 2011-10-09 at 01-02-46.
2011-10-09 01:02:54
#184
heres a good read.. to bad its mostly for nistune..

http://www.nistune.com/docs/NIStune_Mapping_Guide.pdf
2011-10-09 01:29:20
#185
Here is a newer version of that Nistune Guide. I almost went the Nistune route a few months ago.

Version 1.3 versus version 1. Not sure of the differences though.

http://www.plmsdevelopments.com/files/nissan_ecu_tuning_basics.pdf
2011-10-09 01:34:41
#186
explaining k value on the map again:
http://www.sr20-forum.com/598375-post37.html
2011-10-09 01:54:51
#187
i think the vq lynch used was an n62 map. and based on a camed de with ve injectors having a close to the same k value i think were good there. when i find a way to post i'll post my revised version. no changes to the fuel and timing maps. just changed vq map to the one vadim posted and low fuel inrichment to .9 instead of 1.0 for better idle, and 8000 rev limit.
2011-10-09 01:57:40
#188
the one i used was for a J60 maf (atleast thats what comes up when i search for hcr32 sr20det maf) but ya never know man..


im not going to worry about it, going turbo an more then likely going to get a n62 an thats hella easy to find in nistune lol
2011-10-09 02:14:02
#189
checked a bunch of other tunes for n60, and all had the vq vadim posted.
2011-10-09 02:19:36
#190
well do me a favor, set the alfredlesstiming-n60.bin using that vq then email it to me lynchfourtwenty at hotmail dot com

im curious what i'll show up as in nistune.. this will certainly help alot of folks.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top