Thread: Alfred.bin Needed - for N60 maf.

For all those B14 users around here, you could get every B13 bin runing into your B14, you just have to open the B13 map in Tunerpro using a B13 XDF and copy both maps and K value, then you just open a B14 bin using a B14 XDF and paste it.

Both chips get the same bin file correct?

sounds like the chip is in wrong or it wasn't burnt right.

Yea that's what I'm thinking. I'm still learning how to do this. I think I'm having problems with the device start address and the buffer start address.

I'm gonna steal the burner from work and ill have all weekend to learn what the Hell I'm doing. Lucky I got 2 Hondas that always run great to get me to work lol.

Make sure your starting address and rom chip is correct! For B13/S13s, this should be 8000 and using the 27SF512 (or 0000 if your using the old 29C256)

also make sure the chip is in the burner like this

The program has two start address spots "buffer" and "device" which one do I set to 8000

I think I had the 0000 on both. It's been a while since I burned a chip.

Ok thanks. I will be trying everything this weekend.

Can you post the B13 XDF please?

Thanks.