Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Performance Plus 6 speed mount kits

+ Reply To Thread
Posts: 61-70 of 73
2015-11-17 17:41:25
#61
did these ever ship back?
2016-02-18 03:41:35
#62
Yes, a long time ago. Heard you were trading them for some other goodies.
2016-02-19 08:01:52
#63
Just wanted to end this thread on a more positive note.

I am the new owner of zeneffects mounts, and planning to take them into use the following month. My original plan was to fabricate my own mounts, since I have access to an excellent fabricator, but the amount of time that would go to that would be enormous. Purchasing a completed set is well worth the money, if I were to measure,cut, weld, test fit, cut, weld test fit, cut, redesign, etc. etc., the total amount of man-hours would exceed the price of these mounts by quite a bit.

So far I'm loving these, I'll be sure to throw some pics up as soon as I get everything back together!

Thanks again to @nsusammyeb and @zeneffect !
2016-02-19 22:21:22
#64
Originally Posted by Dala
Just wanted to end this thread on a more positive note.

I am the new owner of zeneffects mounts, and planning to take them into use the following month. My original plan was to fabricate my own mounts, since I have access to an excellent fabricator, but the amount of time that would go to that would be enormous. Purchasing a completed set is well worth the money, if I were to measure,cut, weld, test fit, cut, weld test fit, cut, redesign, etc. etc., the total amount of man-hours would exceed the price of these mounts by quite a bit.

So far I'm loving these, I'll be sure to throw some pics up as soon as I get everything back together!

Thanks again to @nsusammyeb and @zeneffect !


Hey! I sent them to you
2016-02-20 00:31:51
#65
Go Dala, Go!!
2016-03-29 02:20:02
#66
Originally Posted by Dala
Just wanted to end this thread on a more positive note.

I am the new owner of zeneffects mounts, and planning to take them into use the following month. My original plan was to fabricate my own mounts, since I have access to an excellent fabricator, but the amount of time that would go to that would be enormous. Purchasing a completed set is well worth the money, if I were to measure,cut, weld, test fit, cut, weld test fit, cut, redesign, etc. etc., the total amount of man-hours would exceed the price of these mounts by quite a bit.

So far I'm loving these, I'll be sure to throw some pics up as soon as I get everything back together!

Thanks again to @nsusammyeb and @zeneffect !


Sorry to hear the new "revised" mounts still didn't fit..
2016-03-29 19:16:07
#67
Eh, they were kind of what I expected. I enlarged 6 holes in total with a 14mm drill. I had to cut and reweld one flange, and I think I know why.



During production, the piece was probably aligned on the wrong side. It was a really simple task to cut and reweld it like in the picture above. This was the piece:



For people with no access to welding gear, I can see how they could be in for a bad time...
2016-03-29 19:58:43
#68
I only bring it back up be cuz these were SUPPOSED to have been fixed.. obviously not very well.. for the original price that was paid for them, none of that should of been necessary.. great work performance+ LOL
2016-03-30 03:12:00
#69
Originally Posted by Dala
Eh, they were kind of what I expected. I enlarged 6 holes in total with a 14mm drill. I had to cut and reweld one flange, and I think I know why.



During production, the piece was probably aligned on the wrong side. It was a really simple task to cut and reweld it like in the picture above. This was the piece:



For people with no access to welding gear, I can see how they could be in for a bad time...


Oops! Wasn't aware that this bracket was an issue. We fixed the mounts that were mentioned throughout this thread. Glad they worked out @Dala.
2016-03-30 15:25:06
#70
I am very happy with them Should handle a lot of power, with no risk of crooked/squished bushings
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top