Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Parts you want to see.

+ Reply To Thread
Posts: 1-10 of 82
2014-03-17 00:26:45
#1
Parts you want to see.
We want to know what parts you guys want to see readily available. We'll try anything once and want to know your ideas and hear your input. Feel free to speak openly in this thread. Pro's, con's etc.
2014-03-17 01:04:41
#2
Maybe some kind of a solid rear shifter stabilizer bushing. My friends bushing just ripped recently and we got another rubber one from the junk yard.
2014-03-17 01:48:09
#3
Originally Posted by pan_duh
Maybe some kind of a solid rear shifter stabilizer bushing. My friends bushing just ripped recently and we got another rubber one from the junk yard.


we already have one available from gspec/ Custom Steel if you can find one or this is what i do to all my cars...
http://www.sr20-forum.com/general-sr20/3938-cheap-shifter-stabilizer-mount.html?highlight=shifter

I would like to see a couple things readily available
-aluminum radiator cooling plate for b13/nx,polished or powdercoated.
-Aluminum underbelly skidplates .
-Aluminum AC compressor bracket
-Aluminum airbox/heatsheild similar to ARC setup,but not ARC price..lol
thats a start.
Last edited by eggman on 2014-03-17 at 01-58-39.
2014-03-17 02:40:40
#4
Originally Posted by eggman
I would like to see a couple things readily available
-aluminum radiator cooling plate for b13/nx,polished or powdercoated.
-Aluminum underbelly skidplates


I second these two

And also propose a nice power steering fluid reservoir
2014-03-17 03:49:16
#5
Good shit eggman.
2014-03-17 11:54:42
#6
Very good ideas guys. I've thought about skid plates before. The only drawback is that sheet aluminum is very pricey and you'd be looking at several hundred dollars for one. If there is still any interest in them after hearing that, we will see what we can come up with. I know that a lot of drag racers use belly pans for engine diapers so they could use them as well.
Last edited by nsusammyeb on 2014-03-17 at 12-46-16.
2014-03-17 13:06:02
#7
Originally Posted by eggman
Originally Posted by pan_duh
Maybe some kind of a solid rear shifter stabilizer bushing. My friends bushing just ripped recently and we got another rubber one from the junk yard.


we already have one available from gspec/ Custom Steel if you can find one or this is what i do to all my cars...
http://www.sr20-forum.com/general-sr20/3938-cheap-shifter-stabilizer-mount.html?highlight=shifter

The cs bracket is on backorder till who knows when. I tried to order one from greg amongst other things the other day and just ended up getting the bushing in the link you supplied.
2014-03-18 13:27:09
#8
End the vicious trunk cover cycle FOREVER - SR20 Forum

These. Parcel shelf pivots.
2014-03-18 23:16:30
#9
Originally Posted by canx2k
End the vicious trunk cover cycle FOREVER - SR20 Forum

These. Parcel shelf pivots.


Doable. However, I don't have a local NX for mockup.
2014-03-19 01:22:38
#10
This is just a idea for our lower cars, and for does big engine builds that need a little more oil, etc. Can you guys make something like this;
Greddy

Tomei

I know that this type of oil pans don't fit our cars it be nice to have a option for FWD applications. Since is a lower and wider profile it will be good for lower cars and also for what is actually intended to do.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top